User manual

PCE-7210 User Manual 66
Chapter 5 VGA Setup
5.1 Introduction
• The PCE-7210 has VGA onboard; you need to install the VGA driver
to enable the function.
• The on-board ATI RADEON 7000-M graphic accelerator including
16MB frames buffer memory on chip. It provides dual VGA display
and supports DVI interface for panel display.
5.2 Windows XP Driver Setup
Note: Before installing this driver, make sure the CSI
utility has been installed in your system. See
Chapter 4 for information on installing the CSI
utility
Note: While install the VGA driver, please select the
proper version for the OS that you are using
manually. The Driver path is: \\02-VGA_driver.
Note: ATI recommends Windows XP Service Pack 2
or higher to be installed.
Note: You must have Microsoft .NET Framework
installed prior to downloading and installing the
Catalyst Control Center:
The Driver Path is: \\02-VGA_driver\Framework.