User manual

49 Chapter 3
This selection is available only if you select .ECP. or .ECP + EPP. In the
Parallel Port Mode field. In ECP Mode Use DMA, you can select DMA
channel 1, or DMA channel 3. Leave this field on the default setting.
3.6.23 Onboard Serial Port 3
The settings are "3F8", "2F8 ", "3E8 ", "2E8 "and "Disabled" for the on-
board serial port3.
3.6.24 Onboard Serial Port 3 use
The settings are "IRQ5", "IRQ10" for the on-board serial port3.
3.6.25 Onboard Serial Port 4
The settings are "3F8", "2F8 ", "3E8 ", "2E8 "and "Disabled" for the on-
board serial port4.
3.6.26 Onboard Serial Port 4 use
The settings are "IRQ5", "IRQ10" for the on-board serial port4.
3.7 Power Management Setup
The Power Management Setup allows you to configure you system to
most effectively save energy while operating in a manner consistent with
your own style of computer use.
Figure 3.11: Power management setup screen-1