User manual

PCE-7210 User Manual 42
3.4.17 MPS Version Control For OS
This feature is only applicable to multiprocessor motherboard as it speci-
fies the version of the Multi-Processor Specification (MPS) that the
motherboard will use. MPS 1.1 was the original specification. MPS ver-
sion 1.4 adds extended configuration tables for improved support of mul-
tiple PCI bus configurations and greater expandability in the future.. The
selections are "1.1" or "1.4."
3.4.18 Console Redirection
When choose "Enable" users may configure BIOS SETUP and monitor
POST via COM1 while during system power on, the host system must
connect to the system with serial line before power on system.
The default is "Disable".
3.4.19 Baud Rate
This is to set the COM1 baud rate when using the Console Redirection
function.
3.4.20 Agent Connect via
Please keep the default setting.
3.4.21 Agent wait time(sec)
This is for setting the waiting time that local system waits for Host system
response. The selection is "3", "6", "12", "18" second.
3.4.22 Agent after boot
When choose "enable" the host system still can monitor local system after
local system entering "DOS" environment.