User manual

PCE-7210 User Manual 38
IDE Channel 0 Master/Slave IDE Channel 1 Master/Slave: Press PgUp/
<+> or PgDn/<-> to select Manual, None, Auto type. Note that the speci-
fications of your drive must match with the drive table. The hard disk will
not work properly if you enter improper information for this category. If
your hard disk drive type is not matched or listed, you can use Manual to
define your own drive type manually. If you select Manual, the system
will prompt for related information for the following items. Enter the
information directly from the keyboard. This information should be pro-
vided in the documentation from your hard disk vendor or the system
manufacturer.
Figure 3.3: Standard CMOS features IDE Channel screen