User`s manual

32 PCA-6753 User's Manual
3.2.8 Set Password
To enable the password feature, you must first select either Setup
or System under the Security Option in the Advanced BIOS
Features Setup.
To change the password, choose the Set Password option from the
Initial Setup Screen menu and press <Enter>.
1. If the CMOS is bad or this option has never been used, a
default password is stored in the ROM. The screen will display
the following messages:
Enter Password:
Press <Enter>.
2. If the CMOS is good or this option has been used to change
the default password, the user is asked for the password stored
in the CMOS. The screen will display the following message:
Confirm Password:
Enter the current password and press <Enter>.
3. After pressing <Enter> (ROM password) or the current pass-
word (user-defined), you can change the password stored in
the CMOS. The password can be at most eight (8) characters
long.