User`s manual
4 PCM-3521 User's Manual
These software drivers support the following software
applications in the filenames and resolutions listed:
Driver Resolution & Filenames
Application Filename Resolution Colors Notes
Windows 3.1
LINEAR4.DRV 640x480 16 510
800x600 16
LINEAR8.DRV 640x480 256 510
800x600 256
1024x768 256 545/540
LINEAR15.DRV 640x480 32K 545/540
LINEAR16.DRV 640x480 64K 545/540
LINEAR24.DRV 640x480 16M 540
W3LM600P.DRV 800x600 16
W3LM768P.DRV 1024x768 16
W3PM480.DRV 640x480 256 510
W3PM600P.DRV 800x600 256
R12.DRV 480x640 16 510
OS/2 Version
SV480256.DLL 640x480 256
2.1
PD600256.DLL 800x600 256
PD768256.DLL1024x768 256
AutoCAD
DLDVGA.EXE 640x480 16 510
800x600 16
1024x768 16
640x480 256 510
Lotus 1-2-3
V132X25.DRV 132x25(text)16
V132X50.DRV 132x50(text)16
Word 5.0
VGA600.VID 800x600 16
VGA768.VID 1024x768 16
Word 5.5
VGA55600.VID 800x600 16
VGA55768.VID 1024x768 16
Wordperfect
CHIPS600.WPD800x600 16
5.0
CHIPS768.WPD1024x768 16
Wordperfect
VGA600.VRS 800x600 16
5.1
VGA768.VRS 1024x768 16
Notes: 510 - can be used on the 65510
controller.
545/540 - operates with the 65545 and
65540 controllers only.
540 - functions with the 65540
controller only.
Windows
These drivers are designed to work under Microsoft
Windows version 3.1 and Pen Windows version 3.1..
Driver installation
1. Install Windows as you normally would for a VGA
display. Run WIndows to make sure that it is working
correctly. Then exit from Windows.
2. Place the Display Driver Diskette # 1 in driver A. Type A:
<ENTER> to make this the default drive. Type SETUP
<ENTER> to run the driver setup prgram. Press any
key to get to the applications list. Using the arrow keys,
select Windows version 3.1 and press the <ENTER>
key. Use the <ENTER> key to select All Resolutions,
then press <END> to begin the installation procedure.
At this point, you will be asked for the path to your
Windows system directory (default C:\WINDOWS).
When the installation is complete, press any key to
continue. Press <ESC> followed by Y to exit to DOS.
3. Change to the directory where you installed Windows
(usually C:\WINDOWS).
4. Type SETUP <ENTER> to run the Windows setup
program, which will show the current Windows
configurations. Use the up arrow key to move to the
Display line and press <ENTER>. A list of display
drivers will be shown. Then use the arrow keys to select
one of the drivers starting with an asterix (*) and press
<ENTER>.
5. Follow the directions on the screen to complete the
setup. In most cases, you may press <ENTER> to
accept the suggested option. When the setup is done, it
will automatically return to DOS. Type WIN <ENTER> to
start Windows with the new display driver.
Changing display drivers from DOS
To change display drivers from DOS, change to the
Windows directory and run Setup, repeating steps 4 and 5
from the previous section. Besides the special display
drivers marked by an asteriks (*), you should be able to use
the following standard drivers:
VGA: 640 x 480, 16 colors
Super VGA: 800 x 600, 16 colors
Changing display drivers from Windows
Select the Windows Setup icon from the main window,
which will then show the current setup configuration. Select
change system settings from the option menu. Click on the
arrow at the end of the display line to access the list of
display drivers. Select the driver preferred, then click on the
OK button. FOllow the directions to complete the setup
procedure.
Changing color schemes
After you change display drivers, you may notice that the
color scheme used by Windows looks strange as different
drivers have different default colors. In order to change the
color schemes, open the control panel within the main
window and select the color icon. Choose the color scheme
preferred and click on the OK button.
Panning drivers
Special panning drivers are provided to allow high-
resolution modes to be displayed on a flat panel or
CRT. these drivers will show a section of a larger, and
will automatically pan or scroll the screen horizontally