User`s manual

51 Chapter 3
3.10.1 CPU Clock Ratio
Key in a DEC number to set up the CPU Clock Ratio (Min=14; Max=17).
This item only shows up in special situations.
3.10.2 Spread Spectrum
This setting allows you to reduce the EMI by modulating the signals the
CPU generates so that the spikes are reduced to flatter curves. It achieves
this by varying the frequency slightly so that the signal does not use any
particular frequency for more than a moment. The choices are: "Dis-
abled," and “Enabled.”
3.11 Password Setting
To change the password:
1. Choose the “Set Password” option from the “Initial Setup Screen”
menu and press <Enter>.
The screen will display the following message:
Press <Enter>.
2. If the CMOS is good or if this option has been used to change the
default password, the user is asked for the password stored in the CMOS.
The screen will display the following message:
Enter the current password and press <Enter>.
3. After pressing <Enter> (ROM password) or the current password
(user-defined), you can change the password stored in the CMOS. The
password must be no longer than eight (8) characters.
Remember, to enable the password setting feature, you must first select
either “Setup” or “System” from the “Advanced BIOS Features” menu.
Please Enter Your Password
Please Confirm Your Password