User`s manual

PCA-6188 User’s Manual 32
3.4.15 Security Option
Select whether the password is required every time the system boots or
only when you enter setup.
"System" The system will not boot, and access to Setup will be denied
if the correct password is not entered at the prompt.
"Setup" The system will boot, but access to Setup will be denied if
the correct password is not entered at the prompt.
3.4.16 APIC Mode
This setting allows you to enable the APIC mode, the choice is “Dis-
abled” or “Enabled.”
3.4.17 MPS Version Control For OS
This reports if an FDD is available for Windows 95. The selections are
"1.1" or "1.4."
Note: To disable security, select “PASSWORD SET-
TING” in the main menu. At this point, you will
be asked to enter a password. Simply press
<Enter> to disable security. When security is
disabled, the system will boot, and you can
enter Setup freely.