User`s manual

PCA-6187 User’s Manual 34
In order to improve performance, certain space in memory is reserved for
ISA cards. This memory must be mapped into the memory space below
16MB. The Choice: "4", "3" and ''2".
3.5.5 DRAM RAS# Precharge
This controls the idle clocks after issuing a precharge command to
DRAM. Leave this on the default setting. The choice : "4", "3" and "2".
3.5.6 Memory Frequency
To adjust the frequency of memory. The choice : "DDR266", "DDR333",
"DDR400" and "Auto".
3.5.7 System BIOS Cacheable
Selecting Enabled allows caching of the system BIOS ROM at F0000h-
FFFFFh, resulting in better system performance. However, if any pro-
gram writes to this memory area, a system error may occur. The Choices:
"Enabled", "Disabled".
3.5.8 Video Bios Cacheable
Selecting Enabled allows caching of the video BIOS, resulting in better
system performance. However, if any program writes to this memory
area, a system error may occur. The Choices: "Enabled", "Disabled".
3.5.9 Memory Hole At 15M-16M
Enabling this feature reserves 15 MB to 16 MB memory address space
for ISA expansion cards that specifically require this setting. This makes
memory from 15 MB and up unavailable to the system. Expansion cards
can only access memory up to 16 MB. The default setting is “Disabled.”
3.5.10 AGP Aperture Size (MB)
Select the size of Accelerated Graphics Port (AGP) aperture. The aper-
ture is a portion of the PCI memory address range dedicated for graphics
memory address space. Host cycles that hit the aperture range are for-
warded to the AGP without any translation. The Choice : "4", "8", "16",
"32", "64", "128", and "256".
3.5.11 Init Display First
Choose the first display interface to initiate while booting. The choice is
"PCI Slot" or "Onboard".
3.5.12 On-Chip VGA
User can disable onboard VGA controller by selecting "Disabled"
3.5.13 On-Chip Frame Buffer Size
User can select frame buffer size. Option is :"1MB", "8MB" and "16MB".