Specifications

PCA-6179 User’s Manual

2. If the CMOS is good or if this option has been used to change the

default password, the user is asked for the password stored in the

CMOS. The screen will display the following message:

Enter the current password and press <Enter>.

3. After pressing <Enter> (ROM password) or the current password

(user-defined), you can change the password stored in the CMOS.

The password must be no longer than eight (8) characters.

Remember, to enable the password setting feature, you must first

select either Setup or System to secure your option in “ADVANCED

BIOS FEATURES”.

3.13 Save & Exit Setup

If you select this and press <Enter>, the values entered in the setup

utilities will be recorded in the CMOS memory of the chipset. The

microprocessor will check this every time you turn your system on

and compare this to what it finds as it checks the system. This record

is required for the system to operate.

3.14 Exit Without Saving

Selecting this option and pressing <Enter> lets you exit the setup

program without recording any new values or changing old ones.

Confirm Password: