Specifications

3.4.4 Boot Up Floppy Seek ................................................40
3.4.5 Boot Up NumLock Status .........................................40
3.4.6 Gate A20 Option .......................................................40
3.4.7 Typematic Rate Setting .............................................40
3.4.8 Typematic Rate (Chars/Sec) .....................................40
3.4.9 Typematic Delay (msec) ...........................................41
3.4.10 Security Option .......................................................41
3.4.11 PCI/VGA Palette Snoop..........................................41
3.4.12 OS Select for DRAM > 64MB................................41
3.4.13 Video BIOS Shadow ...............................................41
3.4.14 C8000-CBFFF Shadow / DC000-DFFFF Shadow .42
3.5 Chipset Features Setup ....................................................42
3.5.1 SDRAM RAS to CAS Delay ....................................43
3.5.2 SDRAM RAS Precharge Time .................................43
3.5.3 SDRAM CAS Latency Time ....................................43
3.5.4 DRAM Data Integrity Mode .....................................43
3.5.5 16 Bit I/O Recovery Time / 8 Bit I/O Recovery .......43
3.5.6 Memory Hole At 15M-16M .....................................43
3.5.7 AGP Aperture Size (MB)..........................................44
3.6 Power Management Setup ..............................................44
3.6.1 Power Management ..................................................44
3.6.2 HDD Power Down ....................................................44
3.6.3 Soft-Off by PWR-BTTN...........................................45
3.7 PCI Configuration Setup.................................................45
3.7.1 IRQ-xx assigned to : PCI/ISA PnP ...........................45
3.7.2 DMA-x assigned to : PCI/ISA PnP...........................46
3.7.3 Used MEM base addr : N/A......................................46
3.8 Load BIOS Defaults .........................................................46
3.9 Load Setup Defaults.........................................................46
3.10 Integrated Peripherals .....................................................47
3.10.1 IDE HDD Block Mode ...........................................47
3.10.2 IDE Primary Master/Slave PIO/UDMA Mode,
IDE Secondary Master/Slave PIO/UDMA Mode (Auto) ..47
3.10.3 On-Chip PCI IDE Primary/Secondary ....................47
3.10.4 Onboard FDC Controller ........................................48