User manual

SNMP-1000-B2 User Manual iv
Initial Inspection
Before beginning card installation, please ensure that the materials specified in the
packing list have been shipped.
SNMP-1000-E1B2
 One SNMP/HTTP system manager kernel board mounted on a PCI/ISA carrier
board
 One 6-pin to 8-pin cable for CPU card connection
 One 2-pin cable for watchdog timer detection
 One ISA slot bracket
 Two thermal sensor board with cable sets
 One 9-pin to 9-pin modem cable
 One SNMP-1000-B2 startup manual
 One CD containing a utility program, SNMP MIB file, and user manual (in pdf
format)
SNMP-1000-E2B2
 One SNMP/HTTP system manager kernel board mounted on a chassis carrier
board
 One 6-pin to 8-pin cable for CPU card connection
 One 2-pin cable for watchdog timer detection
 One 9-pin to 12-pin serial port cable for COM2 of the CPU card
 One RJ-45 cable with bracket for an external LAN connection
 Two thermal sensor boards with cable sets
 One 9-pin to 9-pin modem cable
 One SNMP-1000-B2 startup manual
 One CD containing a utility program, SNMP MIB file, and user manual (in pdf
format)
SNMP-1000-LCD
 One message display module
 One 8-pin cable for SNMP-1000-B2 connection
If any of the items listed above are missing or damaged, contact your distributor or
sales representative immediately.
The mechanical and electrical components of the product have been carefully
inspected prior to shipping. The product should be free from marks and scratches
and in perfect working order upon receipt.
While unpacking, check the product for signs of shipping damage (for example, dam-
aged packaging, scratches, dents, etc.). If your product is damaged or fails to meet
specifications, notify our service department or your local sales representative imme-
diately. Please also notify the carrier. Retain the shipping carton and packing material
for inspection by the carrier. After inspection, we will make arrangements to repair or
replace the unit.