User manual

SNMP-1000-B2 User Manual 6
2.1 Kernel Module Installation
The SNMP-1000-B2 modular design facilitates I/O connection. The kernel module
can be mounted on an I/O extension/carrier module. Several extension modules
designed for specific application needs are available on the market. If your extension
module differs from that depicted in this section, please refer to the user manual of
your extension module for information.
The kernel module features two 32-pin connectors labeled MCN1 and MCN2. The
extension module features two 32-pin connectors labeled CN11 and CN12. MCN1 of
the kernel module should be mounted onto CN11 of the extension module, and
MCN2 of the kernel module should be mounted onto CN12 of the extension module.
Once mounted, secure the kernel module to the extension module using the provided
studs and screws.
Figure 2.1 Kernel module and battery installation
Figure 2.2 Kernel module connectors