Specifications

84 PCA-6176 User’s Manual
3. To create a new partition on the disk device, press Ins. The “Create
a DOS Partition” window appears in the lower right of the screen
and suggests that you create one partition on the disk device, equal
to its entire capacity. If this is what you want to do, skip to Step 5.
4. To change the size of the partition, use the arrow keys to select
Start Cylinder and End Cylinder, and type in the numbers you
want. Partitions up to 2 GB are supported.
5. When the number of cylinders is what you want, press Esc. When
the confirmation prompt appears, select Yes and press Enter to
create the partition. To create more partitions on the same disk
device, repeat steps 3, 4, and 5. As you create partitions on the
disk., they are added to the window at the upper right of the
screen.
6. Press Esc to return to the “Select SCSI Device to Partition”
window. If you want to partition a different disk device, select the
device from the list and repeat the earlier steps.
7. To quit afdisk, press Esc and select Yes to confirm that you want
to quit.