Specifications

76 PCA-6176 User’s Manual
6.4 Adaptec EZ-SCSI Utility
Adaptec EZ-SCSI gives you what you need to use your SCSI devices
most effectively with Windows 95 and Windows NT. You can also
use Adaptec EZ-SCSI on computers running DOS, Windows 3.1x, or
Windows for Workgroups 3.1x.
6.4.1 Quick start instructions
First, install the SCSI devices (see the hardware documentation for
details). Then follow the instructions for your operating system
software in one of the following sections. We recommend that after
you install Adaptec EZ-SCSI, you run SCSI Tutor to learn more about
the features of SCSI.
6.4.2 Windows 95 or Windows NT
If you want to install Windows 95 or Windows NT on a new comput-
er system, you may not be able to access your SCSI CD-ROM drive at
first. (Usually, you install Windows 95 and Windows NT from a
CD-ROM disc.) To gain access to your CD-ROM drive, follow the
DOS Quick Start instructions. Then reboot your computer and follow
these instructions:
1. Install Windows 95 or Windows NT version 3.51 or above, and
start it running on your computer.
2. Insert the Adaptec EZ-SCSI Setup disk/CD into your floppy disk/
CD drive.
3. Click the Start button and select Run.
4. Type a:\setup if you are using the A: drive or b:\setup if you are
using the B: drive. Then click OK.
5. Follow the instructions that appear on the screen.