Specifications

30 PCA-6176 User's Manual
1. Take the specially designed ATX-to-PS/2 power cable out of the
PCA-6176's accessory bag.
2. Connect the 3-pin plug of the cable to CN20 (ATX feature
connector).
3. Connect the power on/off button to CN21. (A momentary type of
button should be used.)
Note: If you do not use an ATX power connector, make
sure that pins 2-3 are closed.
Warnings: 1. Make sure that you unplug your power supply
when adding or removing expansion cards or other
system components. Failure to do so may cause
severe damage to both your CPU card and
expansion cards.
2. ATX power supplies may power on if certain
motherboard components or connections are
touched by metallic objects.
Important: Make sure that the ATX power supply can take at
least a 720 mA load on the 5 V standby lead (5VSB).
If not, you may have difficulty powering on your
system and/or supporting the "Wake On LAN"
function.
2.15.2 Controlling the soft power switch
Users can also identify the current power mode through the system's
power LED (see Section 2.14.1).