User`s manual

Chapter 2 Connecting Peripherals 23
2.4 IR Connector (CN5)
This connector supports the optional wireless infrared transmitting and
receiving module. This module mounts on the system case. You must
configure the setting through BIOS setup.
2.5 USB Connector (CN6)
The PCA-6155V board provides two USB (Universal Serial Bus)
interfaces, which give complete plug and play, hot attach/detach for up
to 127 external devices.The USB interfaces comply with USB
specification rev. 1.0 and are fuse protected.
The USB interfaces are accessed through a 10-pin flat-cable
connector, CN6. The adapter cable has a 10-pin connector on one end
and a USB connector on the bracket.
The USB interfaces can be disabled in the system BIOS setup.
2.6 VGA Display Connector (CN7)
The PCA-6155V provides a VGA controller for a high resolution
VGA interface. The PCA-6155V's CN7 is a DB-15 connector for
VGA monitor input. Pin assignments for the CRT display are detailed
in Appendix C. Share memory architecture supports 0.5 MB, 1 MB,
1.5 MB, 2 MB, 2.5 MB, 3 MB, 3.5 MB and 4 MB system memory.
The memory is configured in the system BIOS setup.
2.7 Keyboard & PS/2 Mouse Connector (CN16)
The PCA-6155V board provides a keyboard connector. A 6-pin mini-
DIN connector (CN16) on the card mounting bracket supports single-
board computer applications. The card comes with an adapter to
convert from the 6-pin mini-DIN connector to a standard DIN connec-
tor and to a PS/2 mouse connector.