User`s manual

37 Chapter 4
45B-STN.BIN (512KB VRAM)
Support 640 x 480 color STN DD 8/16-bit displays
(Sharp LM64C142)
Note: This BIOS does not support simultaneous CRT and
flat panel display with 512KB VRAM.
45B-MONO.BIN
Supports 640 x 480 dual scan monochrome displays
(Sharp LM64P8X/837)
45B-EL.BIN
Supports 640 x 480 EL displays (PLANAR EL640480-A Series)
CBROM.EXE
This program allows you to combine your own VGA BIOS with the Sys-
tem BIOS.
4.2 VGA Display Software Configuration
The PCA-6145B/PCA-6145L’s on-board VGA interface supports a wide
range of popular LCD, EL, gas plasma flat panel displays and traditional
analog CRT monitors. The interface can drive CRT displays with resolu-
tions up to 1024 x 768 in 256 colors. It is also capable of driving color
panel displays with resolutions of 640 x 480 in 64K colors. The VGA
interface is configured completely via the software utility, so you don’t
have to set any jumpers. Configure the VGA display as follows:
1. Apply power to the PCA-6145B/PCA-6145L with a color TFT dis-
play attached. This is the default setting for the PCA-6145B/PCA-
6145L. Ensure that the AWDFLASH.EXE and *.BIN files are located
in the working drive.
NOTE: Ensure that you do not run AWDFLASH.EXE while
your system is operating in EMM386 mode.