User manual

21 PCA-6008VG User Manual
Chapter 2 Connecting Peripherals
JIR1 supports the optional wireless infrared transmitting and receiving module. This
module mounts on the system case. You must configure the setting through the
BIOS setup.
2.18 Case Open Connector (JCASE1)
The signal is connected to the limit switch sensor of the chassis to detect if the case
open or closed.
2.19 LAN1LED (LANLED1)
The PCA-6008 provides an external LAN LED pin header for connecting to the front
side of the chassis. With this convenient design, users can know whether or not the
LAN port is active. Refer to Appendix B for detailed information on pin assignments.
Table 2.2: Hardware Monitor Alarm (JOBS1) setting
Pin setting Function
Close Enable OBS alarm
Open Disable OBS alarm
JCASE1
LANLED1