User`s manual

PCA-6005-B User’s Manual 40
3.6.3.7 Parallel Port Mode (ECP + EPP)
This field allows you to set the operation mode of the parallel port.
The setting are “Normal”, “EPP”, “ECP” and “ECP + EPP”.
3.6.3.8 ECP Mode Use DMA
This selection is available only if you select “ECP” or “ECP +
EPP” in the Parallel Port Mode field. In ECP Mode Use DMA, you can
select DMA channel 1, DMA channel 3, or Disable. Leave this field on
the default setting.
3.6.4 IDE HDD Block Mode
Block mode is also called block transfer, multiple commands, or multiple
sector read/write. If your IDE hard drive supports block mode (most new
drives do), select Enabled for automatic detection of the optimal number
of block read/writes per sector the drive can support. The choice:
Enabled, Disabled
3.6.5 Onboard Lan Boot Rom
The LAN boot ROM for boot on LAN function can be enabled or dis-
abled.
3.6.6 Init Display First
This item allows you to choose which one to activate first, PCI Slot or
AGP. The choices: PCI Slot, AGP.