User`s manual

13
1.8.2 Memory clock setting (S1)
1.9 Memory Installation Procedures
To install DIMMs, first make sure the two handles of the DIMM socket
are in the "open" position. i.e. The handles lean outward. Slowly slide the
DIMM module along the plastic guides on both ends of the socket. Then
press the DIMM module right down into the socket, until you hear a
click. This is when the two handles have automatically locked the mem-
ory module into the correct position of the DIMM socket. To remove the
memory module, just push both handles outward, and the memory mod-
ule will be ejected by the mechanism in the socket.
Table 1.7: Memory Clock Setting Table
CPU Clock DDR Clock
(Frequency)
S4 S3 S2 S1 S0
100 MHz
(400 MHz)
100 MHz
(200 MHz)
OFF OFF OFF OFF ON
100 MHz
(400 MHz)
133 MHz
(266 MHz)
OFF OFF OFF ON ON
100 MHz
(400 MHz)
166 MHz
(333 MHz)
OFF ON OFF OFF ON
133 MHz
(533 MHz)
100 MHz
(200 MHz)
ON OFF ON OFF ON
133 MHz
(533 MHz)
133 MHz
(266 MHz)
ONOFFONONOFF
133 MHz
(533 MHz)
166 MHz
(333 MHz)
ONOFFONONON