FCC ID: M82 MITW101 Computer MIT-W101 User Manual Ver 0.
FCC ID: M82 MITW101 Copyright The documentation and the software included with this product are copyrighted 2014 by Advantech Co., Ltd. All rights are reserved. Advantech Co., Ltd. reserves the right to make improvements in the products described in this manual at any time without notice. No part of this manual may be reproduced, copied, translated or transmitted in any form or by any means without the prior written permission of Advantech Co., Ltd.
FCC ID: M82 MITW101 Declaration of Conformity CE Conformity Statement Radio products with the CE alert marking comply with the R&TTE Directive (1999/5/EC) issued by the Commission of the European Community. Compliance with this directive implies conformity to the following European Norms (in brackets are the equivalent international standards).
FCC ID: M82 MITW101 This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy.
FCC ID: M82 MITW101 – Description of your peripheral attachments – Description of your software (operating system, version, application software, etc.) – A complete description of the problem – The exact wording of any error messages Safety Instructions 1. Read these safety instructions carefully. 2. Keep this user manual for later reference. 3. Disconnect this equipment from AC outlet before cleaning. Do not use liquid or spray detergents for cleaning. 4.
FCC ID: M82 MITW101 Battery Safety RTC Battery Caution RISK OF EXPLOSION IF BATTERY IS REPLACED BY AN INCORRECT TYPE. DISPOSE OF USED BATTERIES ACCORDING TO THE INSTRUCTIONS. Γ Do not place the battery incorrectly as this may cause danger of explosion. Γ Dispose of used batteries according to the manufacturer's instructions. Γ Do not dispose of batteries in a fire. They may explode. Check with local authorities for disposal instructions.
FCC ID: M82 MITW101 Chapter 1 Ready to Go ...............................................................................................9 1.1 Symbols Used in this Manual ...................................................................................... 9 1.2 Product Features........................................................................................................ 10 1.3 Package Contents ....................................................................................
FCC ID: M82 MITW101 4.1.5 Adjusting Screen Brightness ....................................................... 27 4.1.6 Adjusting the Volume............................................................... 28 Chapter 5 Wireless Connections .............................................................................32 5.1 Wi-Fi Connection........................................................................................................ 33 5.2 Bluetooth Connections......................
FCC ID: M82 MITW101 Chapter 1 Ready to Go Congratulations on your purchase of the MIT-W101 Rugged Tablet PC. This product combines rugged design with reliable performance and powerful functionality to best suit all your needs, in a wide range of working conditions. This user manual outlines all you need to know to set up and use your MIT-W101. If you have any further questions or queries, contact our technical support team via our website: http://www.advantech.com.tw/ 1.
FCC ID: M82 MITW101 Denotes information that must be observed. Failure to do so may result in personal harm or damage to the product. 1.2 Product Features • Rugged design. • Featuring with the Future Intel® Celeron ™ processor for intelligent system. • Built-in WLAN/Bluetooth/NFC. • Durable, shock-resistant magnesium alloy housing. • Comply with IP65 sealing & built to withstand a 4 ft drop with only 20 mm in thickness. • 10.
FCC ID: M82 MITW101 1.5 Optional Modules • Barcode Scanner • Expansion module (MSR and Smart Card Reader) 1.6 Exploring the MIT-W101 1.6.1 Front View No.
FCC ID: M82 MITW101 8 Projective capacitive multiple touch screen 9 I/O ports • USB 3.0 x 1 • USB 2.0 x 1 • Micro HDMI x 1 • Audio x 1 10 Connectivity LED indicator • Blue: when Wi-Fi / BT module is on 11 HDD LED indicator • Blinking green: when hard disk drive is working 12 Power / Battery LED indicator • Green: Battery is fully charged (>95%) • Amber : Battery is charging • Amber: Battery life is lower than 10% 1.6.2 Rear View No.
FCC ID: M82 MITW101 1 Back camera 2 Barcode scanner 3 SSD cover 4 Speaker 5 Battery 6 Battery Latch 7 NFC 1.6.3 Right View No. 1 Component Connected pin for expansion module 1.6.
FCC ID: M82 MITW101 No. Component 1 I/O ports cover 2 Audio Jack 3 USB 3.0 4 USB 2.0 5 Micro HDMI 1.6.5 Top View No. Component 1 Function buttons 2 Built-in MIC 3 Power button 1.6.6 Bottom View No.
FCC ID: M82 MITW101 Chapter 2 Getting Started 15
FCC ID: M82 MITW101 2.1 Installing the Rubber Bumpers (Optional) To protect the housing case of MIT-W101, install the rubber bumpers. 1. Install the rubber bumpers on the left and right side of the MIT-W101. 2. Make sure the rubber bumpers are aligned and locked on the indents. 3. Screw the rubber bumpers on left and right properly into the MIT-W101. The Rubber bumper could provide well drop protection when device fall from high place.
FCC ID: M82 MITW101 2.2 Removing the Rubber Bumpers (optional) 1. Unscrew the rubber bumpers from the rear of the tablet PC. 2. Remove the rubber bumpers on the left and right.
FCC ID: M82 MITW101 2.3 Installing an Expansion module (Optional) 1. Make sure the system is turned off. 2. Attach the expansion module connector to the MIT-W101. 3. Screw to secure the expansion module onto the MIT-W101.MIT-M Please assure the expansion module was put on the right position and the screws was fastened when install the module on device. The expansion module might not work if the device was not installed probably or damage by drop.
FCC ID: M82 MITW101 Chapter 3 Making Connections 19
FCC ID: M82 MITW101 3.1 Connecting the Power Before you can use your MIT-W101, you must fully charge the battery. Connect the power adapter as shown and leave to charge for: • A minimum of 2 hours when using the internal battery • A minimum of 4 hours when a second battery is installed Condition: the operation time is based on the LCD backlight at 50% and the average utilization of the system under 10%. 3.
FCC ID: M82 MITW101 3.3 Connecting USB Devices You can connect peripheral devices, such as a USB keyboard and mouse, as well as other wireless devices using the USB ports on the left side of the MIT-W101. 3.4 Connecting Headphones You can connect a pair of headphones using the headphone jack on the left side of the MIT-W101. 3.5 Connecting a Microphone The MIT-W101 features a built-in microphone, but you can still connect an external microphone if needed.
FCC ID: M82 MITW101 22
FCC ID: M82 MITW101 Chapter 4 Turning On 23
FCC ID: M82 MITW101 1. Press and hold the power button to turn on the MIT-W101. 4.1 Controlling the MIT-W101 4.1.1 Using the Touch Screen The MIT-W101 is equipped with touch screen technology, for ease of use when you are on the go. Simply tap the screen with your finger to select icons and run applications. 4.1.2 Using the Tap Function When you tap on the screen with a pen or stylus, it emulates click functions of a regular mouse. • To emulate a left click single tap the screen once.
FCC ID: M82 MITW101 4.1.4 Using the On-Screen Keyboard 1. Click on icon in the taskbar to bring up the on-screen keyboard. 2.Use your finger or stylus pen to tap and enter letters, numbers and symbols as you would with a regular keyboard. To type capital letters tap the lock icon on the on-screen keyboard. 3. To use handwriting, tap bottom right button of On-Screen Keyboard.
FCC ID: M82 MITW101 4. Select the handwriting icon. 5. Use your finger and stylus pen to write on screen.
FCC ID: M82 MITW101 4.1.5 Adjusting Screen Brightness 1. Tap the Settings icon on the right. 2.Tap Screen icon to access the brightness control.
FCC ID: M82 MITW101 3. To move the brightness control bar up / down to increase / decrease brightness. 4.1.6 Adjusting the Volume 1. Tap the Settings icon on the right.
FCC ID: M82 MITW101 2.Tap the Volume icon on the system tray. 1. Move the slide to adjust volume.
FCC ID: M82 MITW101 2. Tap icon to mute.
FCC ID: M82 MITW101 31
FCC ID: M82 MITW101 Chapter 5 Wireless Connections 32
FCC ID: M82 MITW101 5.1 Wi-Fi Connection Wi-Fi access requires a separate purchase of a service contract with a wireless service provider. Contact a wireless service provider for more information. The MIT-W101 comes pre-loaded with WLAN module; you can send and receive signals to a Wi-Fi network then synchronize files. A wireless network can be added either when the network is detected or by manually entering settings information.
FCC ID: M82 MITW101 2. Click the wireless connection icon in the notification area. 3. Select one of the wireless connections and click Connect. 4. You are prompted to enter a Security key for secure access. Contact the network administrator for this key.
FCC ID: M82 MITW101 5. Enter the required Security key and then tap Next to connect. 6. The wireless connection is negotiated. The wireless connection icon in the notification area shows a connected status whenever a wireless connection is present.
FCC ID: M82 MITW101 Set airplane mode or turn off wireless devices 5.2 Bluetooth Connections The MIT-W101 comes with built-in Bluetooth functionality that allows you to connect and communicate with other Bluetooth-enabled devices. 5.2.1 Setting Up Bluetooth Follow these instructions to set up a Bluetooth connection. 1. Type Bluetooth in Search 2. In notification area, tap Add Bluetooth device.
FCC ID: M82 MITW101 3. Add more Bluetooth device by clicking on Add a device. 4. Select Yes for comparing both MIT-W101 and the Bluetooth device after passkey is confirmed.
FCC ID: M82 MITW101 5. The Bluetooth device is successfully added into MIT-W101 when the process is complete. It is recommended that you use a passkey to prevent unauthorized access to your MIT-W101.
FCC ID: M82 MITW101 Chapter 6 Advance Setting 39
FCC ID: M82 MITW101 6.1 Checking Battery Status As it is likely you will be using your MIT-W101 when out and about, it is important that you monitor the battery status regularly, to ensure you do not run out of power at a critical moment. 1. Tap on the Power icon on the system tray to view detailed information and the battery screen appears. Balanced – Automatically balanced performance with energy consumption. Power saver – Saves energy by reducing MIT-W101’s performance. 6.2 Maintenance 6.
FCC ID: M82 MITW101 6.2.2 Maintaining the LCD Display • Do not scratch the surface of the screen with any hard objects. • Do not spray liquid directly on the screen or allow excess liquid to drip down inside the device. • Do not place anything, such as food and drink, on the screen at any time to prevent damage to the screen. • Clean the LCD display only with a soft cloth dampened with denatured alcohol or a proprietary LCD screen cleaner. 6.2.3 Cleaning the MIT-W101 1.
FCC ID: M82 MITW101 Appendix Specifications 42
FCC ID: M82 MITW101 A.1 Specifications Feature Description Microsoft Windows Embedded 8 Standard Operating System Microsoft Windows 7 Professional for Embedded System (Optional) Processor Intel® Celeron® Processor N2930 Max. speed Quad Core 1.83GHz Chipset Intel® Bay Trail-M SoC Memory One DDR3L 1333MHz SO-DIMM, up to 8GB Storage One mSATA SSD, up to 128GB Display 10.
FCC ID: M82 MITW101 Feature Security Description 1. Password security One USB 3.0/ 2.0 One USB 2.0 One HP/MIC combined jack I/O Ports One Micro HDMI type D One DC-in jack One Expansion port 8-pin One Docking port 32-pin Audio Output Expansion Port Physical One 1 watt speaker One MSR (On optional expansion module) One Smart Card Reader (On optional expansion module) 295 x 196 x 20mm Approx. 1.1Kg (base configuration); approx. 2.
FCC ID: M82 MITW101 LED Status DUT AC Internal Green Amber on/off adapter Battery LED LED Remark in Off X X Off Off System Off Off V V Off On Battery is charging Off V V On Off On V V Off On On V V On Off On V V Off On Battery is fully charged (100%) Battery is charging Battery is fully charged (100%) Battery Low (< 10 %) A.2 Optional Accessories A.2.1 External Battery You can use an external battery to extend the power of your MIT-W101.
FCC ID: M82 MITW101 A.2.1.2 Installing the External Battery 1. Align and insert the battery on the MIT-W101. 2. Lock to secure the battery once it is properly to be inserted. A.2.1.2 Removing the External Battery Repeat the above steps in reverse order to remove the battery.
FCC ID: M82 MITW101 A.2.2 Expansion Module Built-in MSR and Smart Card Reader in expansion module. No.
FCC ID: M82 MITW101 A.3 Installing an SSD and a SIM A.3.1.1 Inserting an SSD You can insert an SDD to store data, which needs to be later transferred to another machine, or to simply expand the storage capacity of the MIT-W101. 1. Open the SSD card compartment cover. 2. Insert the SDD, facing upwards, until it clicks into place.
FCC ID: M82 MITW101 3. Screw and fix SSD. 4. Close the SDD compartment cover.
FCC ID: M82 MITW101 A.3.1.2 Removing an SSD 1. Open the SSD compartment cover. 2. Unscrew and remove SSD from the slot.
FCC ID: M82 MITW101 3. Close and screw the SSD card compartment cover.
