User manual

MIO-5250 User Manual 36
The MI/O compact form factor SBC is a new-generation SBC design with a variety of
mechanical improvements. Here is the quick installation guide for our thermal design
and MIOe module installation.
Quick Installation Guide:
1. There is a Heatsink / Cooler in the white box inside the package. Carefully
remove the release paper from the thermal pad before installation.
2. There are six screws inside the white box; please install DRAM in the SO-DIMM
socket first, then screw the heatsink as shown below. Four long screws are for
the heatsink; two shorter screws are for the main board.
3. There are six standoff’s on the MIOe module which can also can be installed
with the screws and copper studs.
Remove the release paper