User Manual MIO-9290 Intel® 3rd Core™ i7/i5/i3 rPGA988, 5.25" MI/O SBC, DDR3/DDR3L, DP, HDMI, DVI-I, 48-bit LVDS, 2 GbE, 4 USB3.
Copyright The documentation and the software included with this product are copyrighted 2014 by Advantech Co., Ltd. All rights are reserved. Advantech Co., Ltd. reserves the right to make improvements in the products described in this manual at any time without notice. No part of this manual may be reproduced, copied, translated or transmitted in any form or by any means without the prior written permission of Advantech Co., Ltd. Information provided in this manual is intended to be accurate and reliable.
Product Warranty (2 years) Advantech warrants to you, the original purchaser, that each of its products will be free from defects in materials and workmanship for two years from the date of purchase. This warranty does not apply to any products which have been repaired or altered by persons other than repair personnel authorized by Advantech, or which have been subject to misuse, abuse, accident or improper installation.
Declaration of Conformity CE This product has passed the CE test for environmental specifications. Test conditions for passing included the equipment being operated within an industrial enclosure. In order to protect the product from being damaged by ESD (Electrostatic Discharge) and EMI leakage, we strongly recommend the use of CE-compliant industrial enclosure products.
Packing List Before you begin installing your card, please make sure that the following materials have been shipped: 1 x MIO-9290 SBC 1 x SATA Cable 30cm (p/n: 1700002155-01) 1 x SATA Power Cable 35cm (p/n: 1700018785) 1 x Audio Cable 20cm (p/n: 1700019584) 2 x COM RS-232/422/485 Cable 22cm (p/n: 1701200220) 1 x Startup Manual (p/n: 2006929000) 1 x Mini Jumper(10pcs package) (p/n: 9689000002) 1 x Screw and stud pack (4 screws for Mini PCIe, 4 M3 (p/n: 9666929000E) studs
MIO-9290 User Manual vi
Contents Chapter 1 General Information ............................1 1.1 1.2 Introduction ............................................................................................... 2 Specifications ............................................................................................ 2 1.2.1 Functional Specifications .............................................................. 2 1.2.2 OS Support ................................................................................... 4 1.2.
3.2.5 3.2.6 3.2.7 Figure 3.17System Agent (SA) Configuration ............................ 36 Figure 3.18 Intel IGFX Configuration.......................................... 37 Figure 3.19LCD Control.............................................................. 38 Figure 3.20PCH-IO Configuration .............................................. 39 Boot Settings .............................................................................. 40 Figure 3.21Boot Setup Utility.........................................
Chapter 1 1 General Information This chapter gives background information on the MIO-9290.
1.1 Introduction The MI/O Extension Single Board Computer MIO-9290 based on the 3rd generation Intel® Core™ i3/i5/i7/Celeron rPGA988 processors with QM77 chipset, supports either 2 channel 1600MHz DDR3 or low power DDR3L, 4 USB3.0, 2 SATA III (600 MB/s), AMT 8.0, and can drive three independent displays (DVI-I, Display Port, HDMI) and Dual Display by any combination interface from the board. MIO-9290 provides not only the powerful computing capability but is also a great graphic capable platform.
Chipset: Intel® QM77 I/O Controller – Direct Media Interface Chapter 1 ∗ Up to 20 Gb/s each direction, full duplex ∗ Transparent to software – Integrated Serial ATA Host Controller ∗ Data transfer rates up to 6.0 Gb/s (600 MB/s) ∗ Integrated AHCI controller – USB – Power Management Logic ∗ Supports Advanced Configuration and Power Interface (ACPI), Version 4.
– HDMI interface supports the HDMI 1.4a specification with audio up to 2560x1600 at 60 Hz Gigabit Ethernet – Port1: QM77 (MAC) + 82579LM GbE (PHY) ∗ Integrated ASF Management Controller ∗ 10/100/1000 BASE-T IEEE 802.3 specification conformance ∗ Energy Efficient Ethernet (EEE) IEEE802.3az support [Low Power Idle (LPI) mode] ∗ Supports up to 9 KB jumbo frames (full duplex) – Port2: I210-IT Gigabit Ethernet Controller ∗ IEEE 802.3az Energy Efficient Ethernet (EEE) ∗ Audio-video bridging ∗ IEEE 1588/802.
Dimensions: 203 x 146 mm (8" x 5.75") Height: Top Side: 33.12 mm (with cooler); Bottom Side: 9.9 mm Weight: 0.9 kg (1.98 lb) (reference weight of total package) 1.2.4 Electrical Specifications * i7 3610QE w/DDR3: 3.759 A @ 12 V (45.11 W), w/DDR3L: 3.675 A @ 12 V (44.1 W) * i5 3610ME w/DDR3: 2.375 A @ 12 V (28.5 W), w/DDR3L: 2.336 A @ 12 V (28.03 W) * i3 3120ME w/DDR3: 1.675 A @ 12 V (20.1 W), w/DDR3L: 1.656 A @ 12 V (19.87 W) * Celeron 1020E w/DDR3: 1.595 A @ 12 V (19.14 W), w/DDR3L: 1.
1.3 Block Diagram Intel Ivy Bridge Mobile rPGA DVI-I DDR3/DDR3L SODIMM x2 FDI eDP DMI DP Display port Display port VGA HD Audio, Line Out 48-bit LVDS USB 2.0 x 3 MIOe HDMI Display port MiniPCIe or mSATA (Full size) PCIe x1, SATA MiniPCIe or mSATA (Full size) With SIM holder PCIe x1, SATA SMBus LPC 16-bit GPIO 4 PCIe x 1 USB 2.0 Intel QM77 Panther Point Mobile PCH USB 2.0 PCA9555 64Mbit BIOS SPI 4 USB 3.0 USB 3.0 & 2.
Chapter 1 Figure 1.3 MIO-9290 Mechanical Drawing (Coastline) 7 MIO-9290 User Manual General Information Figure 1.
MIO-9290 User Manual 8
Chapter 2 2 Installation This chapter explains the setup procedures of the MIO-9290 hardware, including instructions on setting jumpers and connecting peripherals, switches and indicators. Be sure to read all safety precautions before you begin the installation procedure.
2.1 Jumpers and Switches The MIO-9290 has a number of jumpers and switches that allow you to configure your system to suit your application. The table below lists the functions of the various jumpers. Table 2.
Chapter 2 Table 2.3: Connectors LAN CN23 External USB2.0+USB3.0 CN24 External USB2.0+USB3.0 CN25 Display Port CN26 HDMI CN27 DVI-I CN29 Mini PCIE CN30 SATA CN31 SATA CN32 GPIO CN33 GPIO CN34 SATA Power CN35 SATA Power CN36 SIM Card CN37 Internal USB CN38 Mini PCIE CN39 MIOe Installation CN22 2.
Figure 2.2 MIO-9290 Connector Locations (Bottom Side) Figure 2.
You may configure your card to match the needs of your application by setting jumpers. A jumper is a metal bridge used to close an electric circuit. It consists of two metal pins and a small metal clip (often protected by a plastic cover) that slides over the pins to connect them. To “close” a jumper, you connect the pins with the clip. To “open” a jumper, you remove the clip. Sometimes a jumper will have three pins, labeled 1, 2 and 3. In this case you would connect either pins 1 and 2, or 2 and 3.
J2 Auto Power On Setting Part Number 1653002101 Footprint HD_2x1P_79_D Description PIN HEADER 2*1P 180D(M)SQUARE 2.0mm DIP W/O Pb Setting Function Open Power Button for Power On (Default) Closed Auto Power On J3 & J5 COM4 RS232/422/485 Setting Part Number 1653003260 Footprint HD_3x2P_79 Description PIN HEADER 3x2P 2.
Part Number 1653003260 Footprint HD_3x2P_79 Description PIN HEADER 3x2P 2.0mm 180D(M) SMD 21N22050 Setting Function (1-2) COM4 RS232 (Default) (3-4) COM4 RS485 (5-6) COM4 RS422 Installation COM4 RS232/422/485 Setting COM4 RS232 COM4 RS485 COM4 RS422 J8 COM3 RS232/422/485 Setting Part Number 1653003260 Footprint HD_3x2P_79 Description PIN HEADER 3x2P 2.
J9 Clear CMOS Part Number 1653003101 Footprint HD_3x1P_79_D Description PIN HEADER 3x1P 2.0mm 180D(M) DIP 2000-13 WS Setting Function (1-2) Normal (Default) (2-3) Clear COMS Normal Clear CMOS J10 LCD Power Part Number 1653003201 Footprint HD_3x2P_79_D Description PIN HEADER 3x2P 2.0mm 180D(M) DIP 21N22050 Setting Function (1-3) +3.3V (Default) (3-5) +5V (3-4) +12V +3.
SW1 COM4 RS485 Termination PU/PD Part Number 1600003089-01 Footprint SW_2x2P_100_198x378 Description DIP SW ESD102LTZ SMD 2x2P 5.04X6.6X3.1mm Setting Function NO TERMINATION (Default) (OFF)1*(ON)3 TEMINATION PU (OFF)2*(ON)4 TERMINATION PD (OFF)1*(OFF)2 (OFF)1*(ON)3 Installation (OFF)1*(OFF)2 (OFF)2*(ON)4 SW2 COM3 RS485 Termination PU/PD Part Number 1600003089-01 Footprint SW_2x2P_100_198x378 Description DIP SW ESD102LTZ SMD 2x2P 5.04X6.6X3.
(OFF)1*(ON)3 (OFF)1*(OFF)2 (OFF)2*(ON)4 SW6 PCIE/ mSATA Selection Part Number 1600003089-01 Footprint SW_2x2P_100_198x378 Description DIP SW ESD102LTZ SMD 2x2P 5.04X6.6X3.
Chapter 3 AMI BIOS Setup 3
3.1 Introduction AMIBIOS has been integrated into many motherboards for over a decade. With the AMIBIOS Setup program, you can modify BIOS settings and control the various system features. This chapter describes the basic navigation of the MIO-9290 BIOS setup screens. Figure 3.1 Setup program initial screen AMI’s BIOS ROM has a built-in Setup program that allows users to modify the basic system configuration.
Turn on the computer and then press or to enter Setup menu. 3.2.1 Main Setup When you first enter the BIOS Setup Utility, you will encounter the Main setup screen. You can always return to the Main setup screen by selecting the Main tab. There are two Main Setup options. They are described in this section. The Main BIOS Setup screen is shown below. Chapter 3 3.2 Entering Setup AMI BIOS Setup Figure 3.2 Main setup screen The Main BIOS setup screen has two main frames.
3.2.2 Advanced BIOS Features Setup Select the Advanced tab from the MIO-9290 setup screen to enter the Advanced BIOS Setup screen. You can select any of the items in the left frame of the screen, such as CPU Configuration, to go to the sub menu for that item. You can display an Advanced BIOS Setup option by highlighting it using the keys. All Advanced BIOS Setup options are described in this section. The Advanced BIOS Setup screens is shown below. The sub menus are described on the following pages.
Chapter 3 3.2.2.1ACPI Settings AMI BIOS Setup Figure 3.4 ACPI Setting Enable ACPI Auto Configuration This item allows users to enable or disable BIOS ACPI auto configuration. Enable Hibernation This item allows users to enable or disable hibernation. ACPI Sleep State This item allows users to set the ACPI sleep state. Lock Legacy Resources This item allows users to lock legacy devices' resources. S3 Video Repost This item allows users to enable or disable VBIOS run after S3 resume.
3.2.2.2 CPU Configuration Figure 3.5 CPU Configuration Hyper Threading Technology This item allows users to enable or disable Intel? Hyper Threading technology. Active Processor Cores This item allows users to set how many processor cores should be active. Limit CPUID Maximum This item allows users to limit the maximum value of CPUID. Execute Disable Bit This item allows users to enable or disable the No-Execution page protection technology.
Chapter 3 3.2.3 SATA Configuration AMI BIOS Setup Figure 3.6 SATA Configuration SATA Controller(s) This item allows users to enable or disable the SATA controller(s). SATA Mode Selection This item allows users to select mode of SATA controller(s).
3.2.3.1 AMT Configuration Figure 3.7 AMT Configuration Intel AMT This item allows users to enable or disable Intel AMT BIOS extension. BIOS Hotkey Pressed This item allows users to enable or disable BIOS hotkey press. MEBx Selection Screen This item allows users to enable or disable MEBx selection screen. Hide Un-Configuration ME Confirmation This item allows users to hide un-configure ME without password confirmation prompt.
3.2.3.2 PCH-FW Configuration Figure 3.8 PCH-FW Configuration MDES BIOS Status Code This item allows users to enable or disable MDES BIOS Status Code function. Firmware Update Configuration This item allows users to enable or disable ME FW image re-flash function. 27 MIO-9290 User Manual AMI BIOS Setup PET Progress This item allows users to enable or disable PET events progress to receive PET events or not. AMT CIRA Timeout OEM defined timeout for MPS connection to be established.
3.2.3.3 USB Configuration Figure 3.9 USB Configuration Legacy USB Support Enable the support for legacy USB. Auto option disables legacy support if no USB devices are connected. USB3.0 Support This item allows users to enable or disable USB3.0 support. XHCI Hand-Off This is a workaround for the OS without XHCI hand-off support. The XHCI ownership change should claim by XHCI driver. EHCI Hand-Off This is a workaround for the OS without EHCI hand-off support.
Chapter 3 3.2.3.4 SMART Settings AMI BIOS Setup Figure 3.10 SMART Settings SMART Self Test This item allows users to enable or disable SMART Self Test.
3.2.3.5 Embedded Controller Configuration Figure 3.11 Embedded Controller Configuration EC iManager WatchDog IRQ This item allows users to set the IRQ number of EC watchdog. EC Power Saving Mode This item allows users to set board's power saving mode when off. EC iManager Smart FAN This item allows users to enable or disable EC iManager smart FAN feature. This item allows users to enable or disable EC serial port B. Backlight Mode This item allows users to set backlight Function.
Chapter 3 3.2.3.6 Super IO Configuration AMI BIOS Setup Figure 3.12 Super IO Configuration Serial Port 1 Configuration This item allows users to configure serial port 1. Serial Port 2 Configuration This item allows users to configure serial port 2. Serial Port 3 Configuration This item allows users to configure serial port 3. Serial Port 4 Configuration This item allows users to configure serial port 4. Serial Port 5 Configuration This item allows users to configure serial port 5.
3.2.3.7 Platform Misc Configuration Figure 3.13 Platform Misc Configuration Native PCIE Enable This item allows users to enable or disable native PCIE support feature.
Chapter 3 3.2.3.8 Serial Port Console Redirection AMI BIOS Setup Figure 3.14 Serial Port Console Redirection Console Redirection This item allows users to enable or disable console redirection for Microsoft Windows Emergency Management Services (EMS). Console Redirection This item allows users to configuration console redirection detail settings.
3.2.3.9 CPU PPM Configuration Figure 3.15 CPU PPM Configuration EIST CPU runs at its default speed if disabled; CPU speed is controlled by the operating system if enabled. Turbo Mode This item allows users to enable or disable turbo mode. CPU C3/C6/C7 Report This item allows users to enable or disable CPU C-state support. Config TDP LOCK This item allows users to enable or disable Config TDP LOCK. Long duration power limit Long duration power limit in Watts, 0 means use factory default.
Select the Chipset tab from the MIO-9290 setup screen to enter the Chipset BIOS Setup screen. You can display a Chipset BIOS Setup option by highlighting it using the keys. All Plug and Play BIOS Setup options are described in this section. The Plug and Play BIOS Setup screen is shown below. Chapter 3 3.2.4 Chipset AMI BIOS Setup Figure 3.
3.2.4.1 System Agent (SA) Configuration Figure 3.17 System Agent (SA) Configuration VT-d This item allows users to enable or disable VT-d. DDR Selection This item allows users to select which DDR or DDRL voltage.
Chapter 3 3.2.4.2 Intel IGFX Configuration AMI BIOS Setup Figure 3.18 Intel IGFX Configuration GTT Size This item allows users to select GTT size. Aperture Size This item allows users to select aperture size. DVMT Pre-Allocated This item allows users to select DVMT pre-allocated memory size. DVMT Total Gfx Mem This item allows users to select DVMT total memory size. Gfx Low Power Mode This item allows users to enable or disable IGD low power mode.
LCD Control Figure 3.19 LCD Control – Primary IGFX Boot Display Select boot display device at post stage. – LCD Panel Type This item allows users to select panel resolution. – Panel Scaling This item allows users to enable or disable panel scaling. – Active LVDS/DP This item allows users to select the Active LVDS/DP Configuration.
Chapter 3 3.2.4.3 PCH-IO Configuration AMI BIOS Setup Figure 3.20 PCH-IO Configuration PCI Express Configuration This item allows users to configuration PCIE1~PCIE8 root port detail settings. USB Configuration This item allows users to configuration detail of USB functions. PCH Azalia Configuration This item allows users to configuration detail of azalia functions. LAN1 control Enables or disables the PCH LAN controller.
3.2.5 Boot Settings Figure 3.21 Boot Setup Utility Setup Prompt Timeout This item allows users to select the number of seconds to wait for setup activation key. Bootup NumLock State Select the Power-on state for Numlock. Quiet Boot If this option is set to Disabled, the BIOS displays normal POST messages. If Enabled, an OEM Logo is shown instead of POST messages. Option ROM Message Set display mode for option ROM. INT19 Trap Response This item allows option ROMs to trap interrupt 19.
Chapter 3 3.2.6 Security Setup AMI BIOS Setup Figure 3.22 Password Configuration Select Security Setup from the MIO-9290 Setup main BIOS setup menu. All Security Setup options, such as password protection is described in this section. To access the sub menu for the following items, select the item and press : Change Administrator / User Password: Select this option and press to access the sub menu, and then type in the password.
3.2.7 Save & Exit Figure 3.23 Save & Exit 3.2.7.1 Save Changes and Exit When users have completed system configuration, select this option to save changes, exit BIOS setup menu and reboot the computer if necessary to take effect all system configuration parameters. 3.2.7.2 Discard Changes and Exit Select this option to quit Setup without making any permanent changes to the system configuration. 3.2.7.
3.2.7.9 Restore User Defaults The users can select this option to restore user defaults. 43 MIO-9290 User Manual AMI BIOS Setup 3.2.7.8 Save User Defaults When users have completed system configuration, select this option to save changes as user defaults without exit BIOS setup menu. Chapter 3 3.2.7.7 Restore Defaults The MIO-9290 automatically configures all setup items to optimal settings when users select this option.
MIO-9290 User Manual 44
Appendix A A Pin Assignments This appendix contains information of a detailed or specialized nature.
A.1 Connector Tables CN1 12V Power Input Part Number 1655003861 Footprint WF_2x2P_165_BOX_RA_D_740-77 Description ATX PWR Conn. 2x2P 4.2mm 90D(M) DIP 740-77-04TS0 Pin Pin Name 1 GND 2 GND 3 +12V 4 +12V CN2 COM3/COM4 Part Number 1653004793 Footprint HD_10x2P_79_23N685B-20M10 Description BOX HEADER 10x2P 2.
CN3 COM1/COM2 Part Number 1653004793 Footprint HD_10x2P_79_23N685B-20M10 Description BOX HEADER 10x2P 2.
CN4 SODIMMDDR3_204 Part Number 1651001649 Footprint DDR3_204P_2-2013310-1 Description DDR3 SODIMM H=9.
Audio Part Number 1653004099 Footprint HD_5x2P_79_23N685B-10M10 Description BOX HEADER 5x2P 2.00mm 180D(M) SMD 23N685B-10M10 Pin Pin Name 1 LOUTR 2 LINR 3 GND 4 GND 5 LOUTL 6 LINL 7 GND 8 GND 9 MIC1R 10 MIC1L Matching Cable: 1703100152 CN7 COM5 TX/RX Part Number 1655004032 Footprint WF_5P_49_BOX_85205 Description WAFER 5P 1.
CN8 COM6 TX/RX Part Number 1655004032 Footprint WF_5P_49_BOX_85205 Description WAFER 5P 1.
SODIMMDDR3_204 Part Number 1651001904 Footprint DDR3_204P_2-2013289-1 Description DDR3 SODIMM H=5.
CN14 CPU Socket Part Number 1651002177 Footprint SOCKET_PGA989 Description CPU Socket rPGA988B 988P SMD 100361HK988J2S6PQ CN15 CPU FAN Part Number 1655004347 Footprint WF_4P_100_D_744-81-04TW30 Description WAFER 2.54 1*4P 180D(M) DIP 744-81-04TW30 Pin Pin Name 1 GND 2 +12V 3 SPEED 4 PWM CN16 Reset Part Number 1655302020 Footprint WF_2P_79_BOX_R1_D Description WAFER BOX 2P 2.
48 bits LVDS Panel Part Number 1653920200 Footprint SPH20X2 Description B/B Conn. 40P 1.25mm 90D SMD DF13-40DP-1.25V(91) Pin Pin Name 1 +5V or +3.3V or +V12 2 +5V or +3.3V or +V12 3 GND 4 GND 5 +5V or +3.3V or +V12 6 +5V or +3.
CN19 System FAN Part Number 1655003010 Footprint WHP3VA Description Wafer 2.54mm 3P 180D(M) DIP 22-27-2031 Pin Pin Name 1 GND 2 +12V 3 NC CN20 SMBus Part Number 1655904020 Footprint FPC4V-125M Description WAFER 4P 1.
Inverter Power Output Part Number 1655000453 Footprint WHL5V-2M-24W1140 Description WAFER BOX 2.
CN23 External USB2.0+USB3.0 Part Number 1654009860 Footprint USB_9x2P_2360009-603-R Description USB 3.0 CONN 18P 2.0mm 90D(F) DIP 2360009-603-R Pin Pin Name 1 +5V 2 D- 3 D+ 4 GND 5 SSRX- 6 SSRX+ 7 GND 8 SSTX- 9 SSTX+ CN24 External USB2.0+USB3.0 Part Number 1654009860 Footprint USB_9x2P_2360009-603-R Description USB 3.0 CONN 18P 2.
Display Port Part Number 1654010437 Footprint DPCON_20P_3VD51203-H7JJ-7H Description Displayport Conn. 20P 0.5mm 90D(F) SMD 3VD51203 Pin Pin Name 1 ML_Lane0(p) 2 GND 3 ML_Lane0(n) 4 ML_Lane1(p) 5 GND 6 ML_Lane1(n) 7 ML_Lane2(p) 8 GND 9 ML_Lane2(n) 10 ML_Lane3(p) 11 GND 12 ML_Lane3(n) 13 CONFIG1 14 CONFIG2 15 AUX CH(p) 16 GND 17 AUX CH(n) 18 Hot Plug Detect 19 GND 20 +3.
CN26 HDMI Part Number 1654002198 Footprint HDMI19P-471511002 Description HDMI Conn. 19P 0.
DVI-I Part Number 1654004671 Footprint DVI_29P_QH11121-FAT0-4F Description DVI Conn.
CN29 Mini PCIE Part Number 1654006715 Footprint MINIPCIE_FULL_HALF_STANDARD Description MINI PCI Express 52P 9.0mm 90D SMD 88911-5204M Pin Pin Name 1 WAKE# 2 +3.3VSB 3 NC 4 GND 5 NC 6 +1.5V 7 NC 8 UIM_PWR 9 GND 10 UIM_DATA 11 REFCLK- 12 UIM_CLK 13 REFCLK+ 14 UIM_RESET 15 GND 16 UIM_VPP 17 NC 18 GND 19 NC 20 W_DISABLE# 21 GND 22 PERST# 23 PERn0 24 +3.3VSB 25 PERp0 26 GND 27 GND 28 +1.
NC 43 MSATA/PCIe card detect 44 NC 45 NC 46 NC 47 NC 48 +1.5V 49 NC 50 GND 51 NC 52 +3.
CN30 SATA Part Number 1654007578 Footprint SATA_7P_WATF-07DBN6SB1U Description Serial ATA 7P 1.27mm 180D(M) SMD WATF-07DBN6SB1U Pin Pin Name 1 GND 2 TX+ 3 TX- 4 GND 5 RX- 6 RX+ 7 GND CN31 SATA Part Number 1654007578 Footprint SATA_7P_WATF-07DBN6SB1U Description Serial ATA 7P 1.
GPIO Part Number 1653004099 Footprint HD_5x2P_79_23N685B-10M10 Description BOX HEADER 5x2P 2.00mm 180D(M) SMD 23N685B-10M10 Pin Pin Name 1 +5V 2 GPIO4 3 GPIO0 4 GPIO5 5 GPIO1 6 GPIO6 7 GPIO2 8 GPIO7 9 GPIO3 10 GND CN33 GPIO Part Number 1653004099 Footprint HD_5x2P_79_23N685B-10M10 Description BOX HEADER 5x2P 2.
CN34 SATA Power Part Number 1655001154 Footprint WF_4P_98_BOX_R1_D Description WAFER BOX 4P 2.50mm 180D(M) DIP 24W1170-04S10-01 Pin Pin Name 1 +5V 2 GND 3 GND 4 +12V CN35 SATA Power Part Number 1655001154 Footprint WF_4P_98_BOX_R1_D Description WAFER BOX 4P 2.50mm 180D(M) DIP 24W1170-04S10-01 Pin Pin Name 1 +5V 2 GND 3 GND 4 +12V CN36 SIM Card Part Number 1654010809-01 Footprint SIM_6P_5210622-SINR03 Description SIM card conn. 6p 2.
Internal USB Part Number 1653005260 Footprint HD_5x2P_79_N10 Description PIN HEADER 2x5P 2.0mm 180D(M) SMD 21N22050 Pin Pin Name 1 +5V 2 +5V 3 A_D- 4 B_D- 5 A_D+ 6 B_D+ 7 GND 8 GND 9 GND Matching Cable : 1703100260, 1703100121 CN38 Mini PCIE Part Number 1654006715 Footprint MINIPCIE_FULL_HALF_STANDARD Description MINI PCI Express 52P 9.0mm 90D SMD 88911-5204M Pin Pin Name 1 WAKE# 2 +3.3VSB 3 NC 4 GND 5 NC 6 +1.
12 UIM_CLK 13 REFCLK+ 14 UIM_RESET 15 GND 16 UIM_VPP 17 NC 18 GND 19 NC 20 W_DISABLE# 21 GND 22 PERST# 23 PERn0 24 +3.3VSB 25 PERp0 26 GND 27 GND 28 +1.5V 29 GND 30 SMB_CLK 31 PETn0 32 SMB_DAT 33 PETp0 34 GND 35 GND 36 USB D- 37 GND 38 USB D+ 39 +3.3VSB 40 GND 41 +3.3VSB 42 NC 43 MSATA/PCIe card detect 44 NC 45 NC 46 NC 47 NC 48 +1.5V 49 NC 50 GND 51 NC 52 +3.
Appendix A Pin Assignments CN39 MIOe Part Number 1654006235 Footprint BB_40x2P_32_1625x285_2HOLD Description B/B Conn. 40x2P 0.
21 PCIE_RX3+ 22 PCIE_TX3+ 23 PCIE_RX3- 24 PCIE_TX3- 25 GND 26 GND 27 PCIE_CLK+ 28 LOUTL 29 PCIE_CLK- 30 LOUTR 31 GND 32 AGND 33 SMB_CLK 34 NC 35 SMB_DAT 36 NC 37 PCIE_WAKE# 38 NC 39 RESET# 40 NC 41 SLP_S3# 42 CLK33M 43 NC 44 LPC_AD0 45 DDP_HPD 46 LPC_AD1 47 GND 48 LPC_AD2 49 DDP_AUX+ 50 LPC_AD3 51 DDP_AUX- 52 LPC_DRQ#0 53 GND 54 LPC_SERIRQ 55 DDP_D0+ 56 LPC_FRAME# 57 DDP_D0- 58 GND 59 GND 60 USB0_D+ 61 DDP_D1+ 62 USB0_D- 63
DDP_D2- 70 GND 71 GND 72 USB2_D+/USB_SSRX+ 73 DDP_D3+ 74 USB2_D-/USB_SSRX- 75 DDP_D3- 76 GND 77 GND 78 USB_OC# 79 +12VSB 80 +12VSB 83 GND 84 GND 85 GND 86 GND 87 +5VSB 88 +5VSB 89 +5VSB 90 +5VSB 69 Appendix A Pin Assignments 69 MIO-9290 User Manual
MIO-9290 User Manual 70
Appendix B B System Assignments This appendix contains information of a detailed nature.
B.1 System I/O Ports Table B.1: System I/O Ports Addr.
Table B.3: 1st MB Memory Map Addr. Range (Hex) Device E0000h - FFFFFh PCI Bus D0000h - DFFFFh PCI Bus C0000h – CFFFFh System board A0000h - BFFFFh PCI Bus A0000h - BFFFFh Intel® HD Graphics 00000h - 9FFFFh System board B.4 Interrupt Assignments Table B.
MIO-9290 User Manual 74
Appendix C Watchdog Timer Sample Code C
C.1 Watchdog Timer Sample Code EC_Command_Port = 0x29Ah EC_Data_Port = 0x299h Write EC HW ram = 0x89 Watch dog event flag = 0x57 Watchdog reset delay time = 0x5E (high byte), 0x5F (low byte) Reset event = 0x04 Start WDT function = 0x28 Stop WDT function = 0x29 Reset WDT function = 0x2A =============================================================== .model small .486p .stack 256 .data .code org 100h .STARTup mov dx, EC_Command_Port mov al,89h ; Write EC HW ram.
; start WDT function. (Stop: 0x29, Reset: 0x2A) Appendix C Watchdog Timer Sample Code mov al,28h out dx,al .
www.advantech.com Please verify specifications before quoting. This guide is intended for reference purposes only. All product specifications are subject to change without notice. No part of this publication may be reproduced in any form or by any means, electronic, photocopying, recording or otherwise, without prior written permission of the publisher. All brand and product names are trademarks or registered trademarks of their respective companies. © Advantech Co., Ltd.
