User manual

11 MIO-2261 User Manual
Chapter 2 H/W Installation
Power LED
Power LED indicator would light when power is on.
HDD LED
HDD LED indicator for hard disk access is an active low signal\
2.2.2.13 Gigabit Ethernet Connector (CN14)
MIO-2261 uses Intel® 82583V Ethernet chip (10/100/1000 Mbps) linked to dedicated
PCIe x1 lane via RJ-45 connector.
2.2.2.14 High Definition Audio Interface (CN15)
MIO-2261 provides one 5x 2 pin box header for audio device. It can support high def-
inition audio stereo by customized audio module that has codec onboard.
2.2.2.15 MIOe connector (CN16)
MIO-2261 supports MIOe connector to extend flexible I/Os.
Interface
2 x USB 2.0, 2 x PCIe x1, LPC, HD Audio line-out, SMBus, DP (or HDMI, supported
by request), 5 Vsb/12 Vsb power.
Total peripheral power supply output
5 V @ 3 A for CPU board and MI/O Extension module totally, 12 V @ 2 A for MI/O
Extension module.
2.2.2.16 Inverter Power/Internal SATA Power Connector (CN17)
The LCD inverter is connected to CN17 via a 5-pin connector to provide +5 V/+12 V
power to the LCD display, and 5V power can be provided for 2.5" SATA HDD via
CN17.
SATA power's current is only sufficient for 2.5" HDD, and LVDS inverter's current is 5
V @ less than 1 A, 12 V @ 500 mA.