User manual

15 Chapter 2 Hardware Setup

2.6.3 Serial ATA Connectors: SATA1, SATA2

SATA1~SATA2 are high-speed SATA interface ports and support SATA

data rates of 150MB/s. Each SATA connector can connect to 1 hard disk

device and is fully compliant with Serial ATA 1.0 specifications.

Figure 2.6: Serial ATA Connectors: SATA1, SATA2

2.6.4 Audio Amplifier Connector: JAMP1

The JAMP1 is used to connect audio amplifiers to enhance audio perfor-

mance.

Figure 2.7: Audio Amplifier Connector: JAMP1

Note Please do not fold the Serial ATA cable into 90-degree angle.

Otherwise, data loss may occur during transmission.

Table 2.3: JAMP1Pin Definition

PIN Pin Definition

1AMP_L-

2AMP_L+

3AMP_R-

4AMP_R+

SATA1

SATA2

Connect to SATA1/2

Take out the dust cover and

connect to the hard disk

devices

Serial ATA cable

JAMP1