User manual

53 UTCA-5503 User Manual
Appendix D IPMI/PICMG Command Subset Supported by the uShM
Set Sensor Event Enable 29.10 S/E 28h Optional
Get Sensor Event Enable 29.11 S/E 29h Optional
Get Sensor Event Status 29.13 S/E 2Bh Optional
Get Sensor Reading 29.14 S/E 2Dh Mandatory
FRU Device Commands
Get FRU Inventory Area Info 28.1 Storage 10h Mandatory
Read FRU 28.2 Storage 11h Mandatory
Write FRU 28.3 Storage 12h Mandatory
SDR Device Commands
Get SDR Repository Info 27.9 Storage 20h Mandatory
Reserve SDR Repository 27.11 Storage 22h Mandatory
Get SDR 27.12 Storage 23h Mandatory
Add SDR 27.13 Storage 24h Mandatory
Partial Add SDR 27.14 Storage 25h Mandatory
Delete SDR 27.15 Storage 26h Optional
Clear SDR Repository 27.16 Storage 27h Mandatory
Enter SDR Repository Update Mode 27.19 Storage 2Ah Optional
Exit SDR Repository Update Mode 27.20 Storage 2Bh Mandatory
SEL Device Commands
Get SEL Info 25.2 Storage 40h Mandatory
Get SEL Entry 25.5 Storage 43h Mandatory
Add SEL Entry 25.6 Storage 44h Mandatory
Clear SEL 25.9 Storage 47h Mandatory
Get SEL Time 25.10 Storage 48h Mandatory
Set SEL Time 25.11 Storage 49h Mandatory
Reserve SEL 25.4 Storage 42h Optional
LAN Device Commands
Get LAN Configuration Parameters 19.1 Transport 01h Mandatory
Set LAN Configuration Parameters 19.2 Transport 02h Mandatory
AdvancedTCA
Get PICMG Properties 3-9 PICMG 00h Mandatory
Get Address Info 3-8 PICMG 01h Mandatory
FRU Control 3-21 PICMG 04h Optional
Get FRU LED Properties 3-23 PICMG 05h Mandatory
Get LED Color Capabilities 3-24 PICMG 06h Mandatory
Set FRU LED State 3-25 PICMG 07h Mandatory
Get FRU LED State 3-26 PICMG 08h Mandatory
Set FRU Activation Policy 3-16 PICMG 0Ah Mandatory
Get FRU Activation Policy 3-17 PICMG 0Bh Mandatory
Set FRU Activation 3-15 PICMG 0Ch Mandatory
Get Device Locator Record ID 3-28 PICMG 0Dh Mandatory
FRU Control Capabilities 3-24 PICMG 1Eh Mandatory
Table D.1: IPMI/PICMG Command Subset Supported by the uShM