User manual

Table Of Contents
UTCA-5503 User Manual 44
B.1 IPMI/PICMG Command Subset Supported by the
MCMC
Table B.1: IPMI/PICMG Command Subset Supported by the MCMC
Command
IPMI/ATCA/
AMC/MTCA
Spec
NetFn CMD
Carrier
Manager Req
IPM Device “Global” Commands
Get Device ID 17.1 App 01h Mandatory
Cold Reset 17.2 App 02h Optional
Warm reset 17.3 App 03h Optional
Get Self Test Results 17.4 App 04h Mandatory
Get Device GUID 17.8 App 08h Optional
IPMI Messaging Support Commands
Set BMC Global Enables 18.1 App 2Eh Mandatory
Get BMC Global Enables 18.2 App 2Fh Mandatory
Clear Message Flags 18.3 App 30h Mandatory
Get Message Flags 18.4 App 31h Mandatory
Get Message 18.6 App 33h Mandatory
Send Message 18.7 App 34h Mandatory
Master Write-Read 18.10 App 52h Optional
Get Channel Authentication
Capabilities
18.12 App 38h Mandatory
Get Session Challenge 18.14 App 39h Mandatory
Activate Session 18.15 App 3Ah Mandatory
Set Session Privilege Level 18.16 App 3Bh Mandatory
Close Session 18.17 App 3Ch Mandatory
Get Session Info 18.18 App 3Dh Mandatory
Set Channel Access 18.20 App 40h Mandatory
Get Channel Access 18.21 App 41h Mandatory
Get Channel Info 18.22 App 42h Mandatory
Set User Access 18.23 App 43h Mandatory
Get User Access 18.24 App 44h Mandatory
Set User Name 18.25 App 45h Mandatory
Get User Name 18.26 App 46h Mandatory
Set User Password 18.27 App 47h Mandatory
BMC Watchdog Timer
Reset Watchdog Timer 21.5 App 22h Mandatory
Set Watchdog Timer 21.6 App 24h Mandatory
Get Watchdog Timer 21.7 App 25h Mandatory
Event Commands
Set Event Receiver 23.1 S/E 00h Mandatory
Get Event Receiver 23.2 S/E 01h Mandatory
Platform Event 23.3 S/E 02h Mandatory
Sensor Device Commands
Get Device SDR Info 29,2 S/E 20h Mandatory
Get Device SDR 29.3 S/E 21h Mandatory