User manual

UTCA-5503 User Manual 38
Below is a list of UTCA-5503’s current supported and unsupported features.
MCMC firmware version: 01.00, FPGA firmware version: 01.00
Known Limitations:
Current MCMC Firmware does not support redundant MCH configurations. Insertion
of two MCHs may have unpredictable results and is explicitly prohibited.
Table 6.1: Current supported and unsupported features
Feature Supported Unsupported REMARK
Carrier Manager basic features
(FRU access, message bridging,
sensor events and alerts, e-Key-
ing)
√
Shelf Manager (uShM) basic fea-
tures (AMC detection, activation,
deactivation)
√
Power Budgeting
√
System Event Log (SEL) with RTC
√
Sensor Data Repository (SDR)
√
Platform Event Filtering (PEF)
√
Cooling Policy
√
Serial Debug Interface routed to
mini-USB
√
Management LAN routing directly
to front port
√
Management LAN routing though
GbE fabric
√
RMCP connections to uShM
√
PPS specific FW update (SDI,
CLI)
√
Redundant FW (backup copy in
external flash)
√
Switch fabric e-Keying
√
Switch fabric Front Port connec-
tion
√
Switch fabric backplane update
channel
√
Switch fabric to AMC connection
√
External system manager connec-
tion
√
External shelf manager
√
Not supported in combina-
tion with integrated uShM
Redundant MCH (uShM)
√
Not yet supported by PPS
HPM.1 update
√
Not yet supported by PPS;
working in progress
FPGA update through HPM.1
√
Work in progress
FW/FPGA update through IPMB/
Management LAN
√
Not yet supported by PPS
Redundant Power Module
√
Dual Cooling Unit
√