User manual
Table Of Contents
- UTCA-5503
- Contents
- 1 Board Specification
- 2 Applications and Overview
- 3 Mezzanine Module Options
- 4 Operations
- 5 Firmware Upgrades
- 6 Overview of Supported Features and Known Limitations
- A MCH Pin List, Connector 1
- B IPMI/PICMG Command Subset Supported by the MCMC
- C IPMI/PICMG Command Subset Supported by the Carrier Manager
- D IPMI/PICMG Command Subset Supported by the uShM
27 UTCA-5503 User Manual
Chapter 4 Operations
<_>: found 1 working PM(s)
<_>: Inserted modules:
<_>: CU # 1
<_>: PM # 1
<_>: MCH # 1
<_>: Current power distribution:
<_>: PM # 1 feeds as primary (used 4.0A):
<_>: MCH # 1 (M,P,E)
<_>: CU # 1 (M,P,E)
<_>: Event from CM Sensor #0 "Hot Swap CM"
<_>: Event from CM Sensor #0 "Hot Swap CM"
<_>: Event from CM Sensor #13 "Hot Swap CU 1"
<_>: Event from CM Sensor #15 "Hot Swap PM 1"
<_>: Event from CM Sensor #19 "Hot Swap MCH 1"
<_>: Event from CM Sensor #19 "Hot Swap MCH 1"
<_>: Event from CM Sensor #27 "IPMB Physical"
<_>: MCH FRU state: M3->M4, cause = 0
<_>: Event from ShM Sensor #0 "Hot Swap ShMM": raw 04 F0 00 6F A4 03
00
<_>: Event from CM Sensor #0 "Hot Swap CM"
<_>: Event from CM Sensor #19 "Hot Swap MCH 1"
<_>: Allowance for FRU activation readiness expired