User manual
Table Of Contents
- UTCA-5503
- Contents
- 1 Board Specification
- 2 Applications and Overview
- 3 Mezzanine Module Options
- 4 Operations
- 5 Firmware Upgrades
- 6 Overview of Supported Features and Known Limitations
- A MCH Pin List, Connector 1
- B IPMI/PICMG Command Subset Supported by the MCMC
- C IPMI/PICMG Command Subset Supported by the Carrier Manager
- D IPMI/PICMG Command Subset Supported by the uShM
23 UTCA-5503 User Manual
Chapter 4 Operations
Microsoft Windows
After installing the driver and connecting the MCH Mini-USB jack, the CP210x USB-
to-UART Bridge Controller can be found in the Windows’ Device Manager.
Figure 4.1 USB-to-UART Bridge Controller Shown on Windows’ Device
Manager
Linux
“dmesg | grep cp21” will show if the driver has been loaded successfully. It is included
in most of the standard 2.6 kernel Linux distributions.
Figure 4.2 cp2101 converter detected when Linux driver installed successfully