User manual

39 MIC-3392 Rev.2 User Manual
Chapter 2 AMI BIOS Setup
2.9 Exit Option
Figure 2.21 Exit Option
2.9.1 Save Changes and Exit
When you have completed the system configuration changes, follow these steps:
1. Select Exit Saving Changes from the Exit menu and press <Enter>. The follow-
ing messages appear on the screen:
Save Configuration Changes and Exit Now?
[Ok] [Cancel]
2. Select Ok to save changes and exit.
2.9.2 Discard Changes and Exit
Follow these steps to quit Setup without making any permanent changes to the sys-
tem configuration.
1. Select Exit Discarding Changes from the Exit menu and press <Enter>. The fol-
lowing messages appear on the screen:
Discard Changes and Exit Setup Now?
[Ok] [Cancel]
2. Select Ok to discard changes and exit. The following messages appear on the
screen:
Discard Changes
3. Select Discard Changes from the Exit menu and press <Enter>.
2.9.3 Load Defaults
This loads the safe defaults values for the MIC-3392 which allows optimum function-
ality and system performance, but may not work best for all computer applications.
Select Load Defaults from the Exit menu and press <Enter>.