User manual

MIC-3392 Rev.2 User Manual 18
1.7.1 CPU & Heatsink Installation Steps
The MIC-3392 contains electrostatically sensitive devices. Please discharge your
clothing before touching the assembly. Do not touch components or connector pins.
We recommend that you perform assembly at an anti-static workbench.
1. Check that the following components are close at hand:
– 1 x CPU
– Thermal paste
– 1 x Heatsink
– 4 x screws
– 4 x springs
2. Apply thermal paste to the top of the CPU die.
3. On the CPU interposer socket, turn the top screw in the “open” direction, to
ensure that it is in the unlocked position.
4. Carefully orient the CPU to the interposer socket
5. Turn the top screw to the “close” position to lock the processor in the socket.
6. Align the screw holes on the heatsink with the spacers on the PCB and seat the
heatsink on the processor.
Note! Match the corner of the interposer socket to the corner of the processor
with triangle mark.