User manual

11 MIC-3392 Rev.2 User Manual
Chapter 1 Hardware Configuration
1.4.3 Switch Settings
SW5-1 selects the LAN port that is used for Serial Over LAN (SoL) functionality. The
10/100 LAN3 port is routed to the rear I/O but is not currently implemented on stan-
dard Advantech Rear I/O modules.
SW5-2 selects the routing of SATA channel 0 to either the onboard HDD socket or
Rear IO module.
Clear CMOS closed
Table 1.8: JP1 Clear CMOS
Table 1.9: SW5-1 LAN for BMC
Default LAN2 on
LAN3 (reserved) off
Table 1.10: SW5-2 SATA HDD channel setting (single PMC)
Default On board on
RTM off
Table 1.11: SW5-2 SATA HDD channel setting (dual PMC)
Default RTM off
Table 1.12: SW5-3 & SW5-4: BMC, SIO & RTM COM2 selections
SW5-3 SW-5-4
BMC to RTM (Default) On On
SIO to RTM On Off