User manual

31 MIC-3392 User Manual
Chapter 2 AMI BIOS Setup
2.5 PCI/PNP Setup
Select the PCI/PnP tab from the MIC-3392 setup screen to enter the Plug and Play
BIOS Setup screen. You can display a Plug and Play BIOS Setup option by highlight-
ing it using the <Arrow> keys. All Plug and Play BIOS Setup options are described in
this section. The Plug and Play BIOS Setup screen is shown below.
Figure 2.13 PCI/PNP Setup
2.5.1 Clear NVRAM
Set this value to force the BIOS to clear the Non-Volatile Random Access Memory
(NVRAM). The Optimal and Fail-Safe default setting is No.
2.5.2 Plug and Play O/S
Set this value to allow the system to modify the settings for Plug and Play operating
system support. The Optimal and Fail-Safe default setting is No.
2.5.3 PCI Latency Timer
This option sets the latency of all PCI devices on the PCI bus. The Optimal and Fail-
Safe default setting is 64.