User manual

25 MIC-3392 User Manual
Chapter 2 AMI BIOS Setup
2.4.2 LAN & SMbus Configuration
Figure 2.6 LAN & SMBus Configuration
2.4.2.1 Select LAN1/LAN2 mode
The item allows you to choose where the LAN1 and LAN2 Gigabit Ethernet ports are
connected. There are 3 options: Front (Default), PICMG 2.16 and Rear I/O board.
2.4.2.2 Select SMBus mode
This setting indicates whether remote management is performed by Advantech's
MIC-3924A Chassis Management Module (CMM) or by an IPMI-enabled CMM such
as the Advantech MIC-3927. The default setting is “BMC” which corresponds to IPMI-
enabled CMM.
Table 2.1: Select SMBus mode
MIC-3924A
Default BMC