User manual

53 MIC-3392MIL User Manual

Chapter 4 IPMI for the MIC-3392MILS

4.3 IPMI Function List

The following standard IPMI commands are supported.

4.3.1 IPMI Device Global Commands

4.3.2 BMC Device and Messaging Interfaces

The BMC messaging interfaces comply with the Intelligent Platform Management

Interface Specification, Version 2.0. The MIC-3392MILS provides 3 messaging inter-

face channels.

! LPC/KCS channel: Connects the H8S/2167 to the system LPC bus. Firmware

sets 1 host interface over LPC: KCS for SMS.

! IPMB channel: Connects IPMB devices or connects to the H8S/2167’s I

C_0

interface.

! Serial port: The H8S/2167 supports one serial port for out-of-band manage-

ment (OOB) as well as one other serial port for firmware flash update.

Note! The Network function (NetFn) field identifies the functional class of the

message. The Network Function clusters IPMI commands into different

sets. Please refer to the IPMI specification of network function codes for

more information.

These command codes are compliant with the IPMI specification. Man-

datory and Optional commands are defined in the IPMI specification.

For more details, please refer to the IPMI specification.

Table 4.1: Supported IPMI device global commands

IPMI Device Global Commands NetFn Cmd Mandatory / Optional

Get Device Id App 0x01 M

Cold Reset App 0x02 O

Get Self Test Results App 0x04 M

Manufacturing Test On App 0x05 O

Set ACPI Power State App 0x06 O

Get ACPI Power State App 0x07 O

Get Device GUID App 0x08 O

Table 4.2: H8S I2C bus connection to NIC SMBus

H8S/2167 Pin Name

C address

Pin Number System Connection

C_1

SCL1

0xC6

48 NIC SMBus clock

SDA1 47 NIC SMBus data

Table 4.3: NIC interrupt

H8S/2167 Pin Name Pin Number Usage

IRQ1# 130 SMALERT# for NIC SMBus