User manual

MIC-3392MIL User Manual 46
3.2.4 Read/Write the Internal Registers
The user will need the following items to build the setup as shown in Figure 3.3 in
order to gain access to the internal registers for the pre-heat function.
! MIC-3392MILC
! RIO-3392MIL
! CompactPCI chassis (or backplane with at least a system slot) that can accom-
modate both the MIC-3392MILC and RIO-3392MIL
! CompactPCI power supply
! USB or PS/2 Keyboard
! USB floppy disk drive
! Floppy disk containing MS-DOS and a DOS utility called “debug32.exe”
! A LCD monitor
! A DVI-I cable for display connection between the LCD monitor and the DVI-I
port on the RIO-3392MIL
Figure 3.3 Set-up for read/write access to the internal registers