User manual

MIC-3392MIL User Manual 40
2.9 Exit Options
Figure 2.21 Exit options
2.9.1 Save Changes and Exit
When you have completed the system configuration changes, follow these steps:
1. Select Exit Saving Changes from the Exit menu and press <Enter>. The follow-
ing messages appear on the screen:
Save Configuration Changes and Exit Now?
[Ok] [Cancel]
2. Select “Ok” to save changes and exit.
2.9.2 Discard Changes and Exit
Follow these steps to quit Setup without making any permanent changes to the sys-
tem configuration.
1. Select Exit Discarding Changes from the Exit menu and press <Enter>. The fol-
lowing messages appear on the screen:
Discard Changes and Exit Setup Now?
[Ok] [Cancel]
2. Select “Ok” to discard changes and exit. The following message appears on the
screen: Discard Changes
3. Select “Discard Changes” from the Exit menu and press <Enter>.
2.9.3 Load Defaults
This loads the safe defaults values for the MIC-3392MIL which allows optimum gen-
eral functionality and system performance, but may not work best for all computer
applications.
Select “Load Defaults” from the Exit menu and press <Enter>.