User manual

35 MIC-3392MIL User Manual
Chapter 2 AMI BIOS Setup
2.6.1 Boot Settings Configuration
Figure 2.15 Boot settings configuration
! Quick Boot: Allows the BIOS to skip certain tests while booting. This will
decrease the time needed to boot the system. The default setting is on
“Enabled”.
! Boot From LAN Support: Used to set the system bootable from LAN. The
default setting is on “Disabled”.
! Quiet Boot: Used to display OEM logo when the setting is “Enabled”. The
default setting, “Disabled”, displays normal POST messages.
! Bootup Num-Lock: On the default setting, “Enabled”, the Num-Lock key is
enabled during system power on.
! PS/2 Mouse Support: Select support for PS/2 mouse - “Disabled”, “Enabled”,
and “Auto”. The default setting is on “Auto”.
! Wait For ’F1’ If Error: Wait for the F1 key to be pressed if an error occurs.
! Hit ‘DEL’ Message Display: Displays “Press DEL to run Setup” in POST.