User manual

33 MIC-3392MIL User Manual
Chapter 2 AMI BIOS Setup
2.5 PCI/PnP Setup
Select the PCI/PnP tab from the MIC-3392MIL setup screen to enter the Plug and
Play BIOS Setup screen. You can display a Plug and Play BIOS Setup option by
highlighting it using the <Arrow> keys. All Plug and Play BIOS Setup options are
described in this section. The Plug and Play BIOS Setup screen is shown below.
Figure 2.13 PCI/PnP setup
2.5.1 Clear NVRAM
Set this value to force the BIOS to clear the Non-Volatile Random Access Memory
(NVRAM). The default setting is “No”.
2.5.2 Plug and Play O/S
Set this value to allow the system to modify the settings for Plug and Play operating
system support. The default setting is “No”.
2.5.3 PCI Latency Timer
This option sets the latency of all PCI devices on the PCI bus. The default setting is
64.