User manual

MIC-3392MIL User Manual 32
2.4.8 Console Redirection Configuration
Figure 2.12 Console re-direction configuration
2.4.8.1 Remote Access
You can disable or enable the BIOS remote access feature here. The default setting
is “Enabled”.
2.4.8.2 Serial Port Number
Select the serial port you want to use for console redirection. You can set the value
for this option to either SIO COM1 or COM2. The default setting is SIO COM1.
2.4.8.3 Serial Port Mode
Select the baud rate you want the serial port to use for console redirection. The
default setting is 115200 8, n, 1.
2.4.8.4 Flow Control
Select the flow control setting for the console re-direction - “None”, “Hardware”, and
“Software”. The default setting is “None”.