User manual

29 MIC-3392MIL User Manual
Chapter 2 AMI BIOS Setup
2.4.5 Hardware Health Configuration
Figure 2.9 Hardware health configuration
! H/W Health Function: Used to enable or disable hardware health event moni-
toring such as system (ambient) temperature, CPU temperature, CPU Vcore,
system 3.3V, 5V, 12V and -12V input voltages, and the on-board 3V CMOS bat-
tery voltage level.
! Show VBAT Voltage: Used to enable or disable the reading of the on-board 3V
battery voltage level.
Note! Set Show VBAT Voltage to “Disabled” when no CMOS battery is
installed on the board.