User manual

MIC-3392MIL User Manual 26
2.4.1.1 Max CPUID Value Limit
It is recommended that you leave this value at the default setting of Disabled.
2.4.1.2 Core Multi-Processing
This item specifies the CPU to perform multi-processing. The default setting for this
item is set to “Enabled”.
2.4.1.3 CPU TM Function
This item specifies the Thermal Monitor Feature. If set to “Enabled”, the BIOS
enables the CPU’s built-in automatic thermal throttling when the die temperature
approaches the processor’s temperature limit. If set to “Disabled”, the MIC-3392MIL
will shut off automatically if the CPU overheats. The default setting is “Enabled”.
2.4.2 IDE Configuration
Figure 2.6 IDE configuration
2.4.2.1 ATA/IDE Configuration
Three options are available: Disabled, Compatible, or Enhanced. “Disabled” means
that all IDE resources are disabled. “Compatible” enables up to two IDE channels for
OSs requiring legacy IDE operation (default setting). And, “Enhanced” enables all
SATA and PATA resources.
2.4.2.2 Legacy IDE Channels
Four options are available: “SATA Only”, “Reserved”, “SATA Pri, PATA Sec”, or “PATA
Only”.
2.4.2.3 Primary IDE Master and Slave
While entering setup, BIOS auto detects the presence of IDE devices. This displays
the status of auto detection of the two possible IDE devices.