User manual

9 MIC-3392MIL User Manual

Chapter 1 Hardware Configuration

1.4.1 Jumper Settings

1.4.2 Clear CMOS (JP6)

This jumper is used to erase CMOS data and reset the system BIOS information. Fol-

low the procedures below to clear the CMOS.

1. Turn off the system.

Table 1.4: MIC-3392MIL jumper descriptions

Number Function

JP5 VGA Output Setting

JP6 Clear CMOS

JP7 CompactFlash Master/Slave Mode Selection

Table 1.5: MIC-3392MIL switch descriptions

Number Function

SW1 PCI Bridge Master/Drone Mode Selection

SW2 BMC Reset/Platform Reset (available on the Front Panel only)

SW3 SATA Port 1 Channel Setting

SW4 BMC Firmware Programmable/Console Setting

Table 1.6: JP5 VGA Output Setting

Default Front Panel 1-2

RTM 2-3

Table 1.7: JP7 Compact Flash Master/Slave Mode Selection

Default IDE Master Closed

IDE Slave Open

123