User`s manual

11 Chapter 1
1.5 Connectors
On-board connectors link to external devices such as hard disk drives,
keyboards, or floppy drives, etc. Table 1.9 lists the function of each con-
nector. Chapter 2 gives instructions for connecting external devices to
your card.
.
Table 1.9: MIC-3369C connector descriptions
Number Function
CN1 Handle Switch
CN2 Reset switch
CN3 RJ-45 COM1 port
CN4 USB 1.1/2.0 port
CN5 USB 1.1/2.0 port
CN6 2.5" IDE Connector
CN7 DB-15 VGA Connector
CN9 CompactFlash™ Socket
PU1 Gigabit RJ-45 LAN Connector
J11/J12 PMC Connector
J13/J14 PMC Connector
J1/J2 Primary CompactPCI™ bus
J3/J5 Rear I/O transition
D8 HDD LED and Power LED
LED1 Hot Swap LED
SW1 Drone mode Selection
Table 1.10: CN1 Handle Switch Definitions
Pin Signal
1-2 Handle Closed
1-3 Handle Open