Installation guide
Table Of Contents
- About This Publication
- Document Revision History
- 1. Post-Release Developments
- 1.1 Service Update for Dialogic® System Release 6.1 CompactPCI for Windows®
- 1.2 PDK Support for Automatic Answer and Reject of Inbound Calls
- 1.3 Status Monitor Tool Support for 16 Span Boards
- 1.4 Improvement to Call Progress Analysis
- 1.5 Media Load Support for the Dialogic® DM/V1200A- 4E1-cPCI Board
- 1.6 Handling non-2xx Responses to T.38 Switch
- 1.7 Important Notice about System Release Update Installation
- 1.8 Media LAN Disconnection Alarm Notification for Dialogic® DM/IP Boards
- 1.9 Support for SFTP in Dialogic® Global Call SS7 Call Control Library
- 1.10 New Media Loads for Dialogic® DM/V4800BC Media Boards Using Special Coders
- 1.11 File Management Enhancements for DebugAngel Tool
- 1.12 File Management Enhancements for PDK Trace Tool
- 1.13 Configuring SIP Stack Parameters with Global Call
- 1.14 Disabling Automatic re-INVITE Message when Switching between Fax and Audio
- 1.15 IP Multicast Client Support
- 1.16 Troubleshooting Information for RTF Logs
- 1.17 Remote Diagnostics Package
- 1.18 Enhanced Diagnostics Tools
- 1.19 New QoS Alarms for RTCP and RTP Inactivity
- 1.20 New Operating System Support
- 1.21 Support for Compute Platforms
- 1.22 New Parameter for Adjusting Silence Threshold on Dialogic® DM3 Boards
- 1.23 File Management Enhancements for ISDNtrace Tool
- 1.24 New Media Loads for Dialogic® DM/V2400A-cPCI and DM/V4800BC Media Boards
- 1.25 Modified Alarm Events for Media LAN Disconnect
- 1.26 Enhancement to its_sysinfo Tool
- 1.27 Modify an Existing SIP Call Using re-INVITE for Dialogic® IPT Boards
- 1.28 PDK Log File Detection
- 1.29 Media Channel Reset Capability (Stuck IP Media Channel Recovery)
- 1.30 Dialogic® Global Call API Access to New H.323/Q.931 Message IEs
- 1.31 On-Demand Full Reset of Dialogic® DM3 Boards
- 1.32 New Dialogic® Diagnostics Management Console
- 1.33 New Runtime Trace Facility (RTF) Manager
- 1.34 Support for Reporting Billing Type
- 1.35 Runtime Control of Double Answer for R2MF
- 1.36 Additional Supported Operating System Security Updates
- 1.37 Media Channel Reset Capability (Stuck Channel Recovery)
- 1.38 Notification of Layer 1 Alarm Events on Dialogic® SS7 Boards
- 1.39 Dialogic® Global Call Support for Time Slots on Dialogic® SS7 Boards Running in DTI Mode
- 2. Release Issues
- 3. Documentation Updates
- 3.1 System Release Documentation Updates
- 3.2 Installation and Configuration Documentation Updates
- 3.2.1 Dialogic® System Release 6.1 CompactPCI for Windows® Software Installation Guide
- 3.2.2 Dialogic® DM3 Architecture for CompactPCI on Windows® Configuration Guide
- 3.2.3 Dialogic® IPT Series on Windows® Configuration Guide
- 3.2.4 Dialogic® Global Call Country Dependent Parameters (CDP) for PDK Protocols Configuration Guide
- 3.3 OA&M Documentation Updates
- 3.3.1 Dialogic® System Release 6.1 CompactPCI for Windows® Administration Guide
- 3.3.2 Dialogic® SNMP Agent Software for Windows® Administration Guide
- 3.3.3 Dialogic® System Software Diagnostics Guide
- 3.3.4 Dialogic® Board Management API Library Reference
- 3.3.5 Dialogic® Event Service API Programming Guide
- 3.3.6 Dialogic® Event Service API Library Reference
- 3.3.7 Dialogic® Native Configuration Manager API Programming Guide
- 3.3.8 Dialogic® Native Configuration Manager API Library Reference
- 3.4 Programming Libraries Documentation Updates
- 3.4.1 Dialogic® Audio Conferencing API Programming Guide
- 3.4.2 Dialogic® Audio Conferencing API Library Reference
- 3.4.3 Dialogic® Continuous Speech Processing API Programming Guide
- 3.4.4 Dialogic® Continuous Speech Processing API Library Reference
- 3.4.5 Dialogic® Digital Network Interface Software Reference
- 3.4.6 Dialogic® Fax Software Reference
- 3.4.7 Dialogic® Global Call API Programming Guide
- 3.4.8 Dialogic® Global Call API Library Reference
- 3.4.9 Dialogic® Global Call E1/T1 CAS/R2 Technology Guide
- 3.4.10 Dialogic® Global Call IP Technology Guide
- 3.4.11 Dialogic® Global Call ISDN Technology Guide
- 3.4.12 Dialogic® Global Call SS7 Technology Guide
- 3.4.13 Dialogic® IP Media Library API Programming Guide
- 3.4.14 Dialogic® IP Media Library API Library Reference
- 3.4.15 Dialogic® Modular Station Interface API Programming Guide
- 3.4.16 Dialogic® Modular Station Interface API Library Reference
- 3.4.17 Dialogic® Standard Runtime Library API Programming Guide
- 3.4.18 Dialogic® Standard Runtime Library API Library Reference
- 3.4.19 Dialogic® Voice API Programming Guide
- 3.4.20 Dialogic® Voice API Library Reference
- 3.5 Demonstration Software Documentation Updates
- 3.5.1 Dialogic® Continuous Speech Processing API Demo Guide
- 3.5.2 Dialogic® Global Call API Demo Guide
- 3.5.3 Dialogic® High Availability for Windows® Demo Guide
- 3.5.4 Dialogic® IP Gateway (Global Call) Demo Guide
- 3.5.5 Dialogic® IP Media Server (Global Call) Demo Guide
- 3.5.6 Dialogic® IP Media Gateway (IPML) Demo Guide
Dialogic
®
System Release 6.1 CompactPCI for Windows
®
Release Update 134
Dialogic
®
System Release Software. If you observe this failure, the following steps
can be used to resolve the problem:
1. Change into the Windows System32 directory.
2. Run “regsvr32 atl.dll”.
3. Change into the Dialogic\bin directory.
4. Run “DetectorsProj -service”.
This can be done once the Dialogic
®
System Release Software installation has
completed with the above error, before rebooting. Since this service is not started
automatically, the above commands can also be done after reboot, but before the
Dialogic
®
boards are started.
It is only necessary to perform this procedure one time.
3.2.2 Dialogic
®
DM3 Architecture for CompactPCI on Windows
®
Configuration Guide
Update to Section 2.4, Media Loads
Because of features introduced in the Service Update, new media loads are available
for the Dialogic
®
DM/V2400A-cPCI and DM/V4800BC Media Boards. These media
load should be documented in Section 2.4, Media Loads. For information about the
new media loads, see Section 1.10, “New Media Loads for Dialogic
®
DM/V4800BC
Media Boards Using Special Coders”, on page 36 and Section 1.24, “New Media
Loads for Dialogic
®
DM/V2400A-cPCI and DM/V4800BC Media Boards”, on page 70
of this Release Update.
Update to Section 2.4.1.1, DM/V, DM/V-A, DM/V-B, and DM/IP Boards
The following information should be added to indicate that some coders are not
supported on the Dialogic
®
DM/V4800BC Board with certain media loads:
When using the Dialogic
®
DM/V4800BC Board, the maximum bit rate for standard
play/record with any basic media load type (for example, media load 1B) is 64 Kbps.
The following coders, which are normally part of the standard basic voice media load,
are not supported on the DM/V4800BC Board with any basic media load due to
density considerations:
• Linear PCM, 8 KHz sampling rate, 16-bit resolution (128 Kbps) VOX and WAVE
• Linear PCM, 11 KHz sampling rate, 8-bit resolution (88 Kbps) VOX and WAVE
• Linear PCM, 11 KHz sampling rate, 16-bit resolution (176 Kbps) VOX and WAVE
Update to Section 2.4.1.1, DM/V, DM/V-A, DM/V-B, and DM/IP Boards
In Table 2, Channel Densities by Board and Media Load (Universal), the table
footnote about echo cancellation should be changed as follows:
• Default configuration is EEC (enhanced EC, 32 ms) for CSP supported ML, unless
otherwise indicated or set in the component named [0x2c] in the respective CONFIG file.
You can only change it to a lower EC tail length, by changing the CSP parameter 0x2c03
accordingly in the respective CONFIG file. Conferencing EC, however, will always be 16
ms, regardless of the EC parameter setting.
Update to Section 3.5, [NFAS] Section
The third note about NFAS D channel backup (DCBU) supported only on ISDN NI-2
protocol is incorrect. DCBU is supported on 4ESS, 5ESS, and NI-2.