User Manual Part 2

MARS-1030F User Manual 108
3.2.16 Power
Table 3.34: Power
Icon Icon and function
• “Battery” Tab: (Figure 3-79)
* Provide change level indicators for the Main battery
and the Backup battery.
* Show the remaining power capacity of the main battery.
* If a “Main Batteries Very Low” warning message shows,
the MARS-1030F will shut down in 30 minutes. (Figure
3-83)
* The PDT will shutdown when the main battery’s capac-
ity is around 0%
.
* To exit the battery control panel, press “OK” from the
command bar, or press <Enter> key on keypad.
• “Schemes” Tab: (Figure 3-80)
* The Scheme tab allows you to determine when to
switch to suspend mode when using either Battery
Power or AC Power.
*Select Battery Power or AC Power as the power
scheme from the pull-down list. (Figure 3-80)
* Select the time to suspend mode from the pull-down
list. (Figure 3-81)
• “Device Status” Tab: (Figure 3-82)
Show the power level of device. The power level ranges
from “High(D0)” which means the device is at the highest
power level to “Off(D4)” which means the device is at the
lowest power level.
Note:
This icon on the taskbar shows that the AC adapter pro-
vides power to the PDT.
The icon on the taskbar shows that Main Batteries pro-
vide power to the PDT.
The icon on the taskbar shows that the AC adapter pro-
vides power to the PDT while charging the main batteries.