User Manual Part 2

115 Chapter 3
3.2.21 System
Table 3.39: System
Icon Icon and function
• “General” Tab: (Figure 3-90)
* To show:
- Firmware information
- Information about processor type, memory size, and
expansion cards
• “Memory”: (Figure 3-91)
* Move the slider to adjust memory allocation. Default
storage memory is normally is normally set to about 8
MB with the reminder assigned to program memory.
* Press the “OK” key on the Keypad.
Note: The difference between the memory occupied by
the OS and the RAM size is shown in Information proper-
ties, along with the total size of storage memory and pro-
gram memory
• “Device Name” Tab: (Figure 3-92)
* Your device uses this information to identify itself to
other computers.
* The input panel will open to for data entry.
* To close the Device Name, press the “OK” button, or
press the <Enter> key on the keypad.
• “Copyrights” Tab: (Figure3-93)
* Refer to this tab for specific copyright data. As a user,
you are responsible for reading this statement.