User Manual Part 1

47 Chapter 2
6. Good scanning position.
The reading range is from 45 to 260mm distance.
– Decrease the scanning distance to the bar code when scanning
small barcodes.
– Increase the scanning distance from the bar code when scanning
large barcodes
– The bar code should be located within the green light spots
– The scanning area is visible by a red illumination area.
7. Bad scanning position.
– Make sure that the laser beam sweeps across whole barcode.
– Scanning operations may fail if the illumination beam is posi-
tioned as below.
8. Upon reading a bar code, the red LED indicator turns on until the
trigger is release or after five seconds. The green LED and the beep
tone indicates a good read.
2.5.9 Help
To tap “?” can get help information for each program.